Thank you. So, I guess I should remove ecoat to welding points and recoat with weldthrough, then when parts are clamped in place, remove weldthrough...

I have never had the problem myself, but how do you know that 25 cfh is getting to the nozzle? One thing to check is try the flow without...

You have to drill out the spot welds obviously to remove the old core support , when u weld in the new one use 3/8 plug welds to replicate spot welds...

Threads almost a year old....

I doubt that it's a primary trigger switch issue. If you say that sometimes the gas comes on but no wire feed, and wire comes out but no arc voltage...

I have never had luck welding anything but clean bare metal.

I'm bad at explaining things. Maybe someone els can chime in too if you don't understand what I'm saying. Don't over think it. Good luck.

Those look really expensive to have made but for some projects they might be worth it.

Drill your holes for your plug welds in the core support . You can weld them up with out taking off the e coat but u might get a little porosity in...

Hey drip you might need to get your head out of your blogashere every now and again. Check it out, let me introduce you to the 21st century-colored...

That sounds a lot better. Happy burning :)

Sorry for the delay, wife kept me busy today ;o) edit.can't fix the redable for readable...no wonder why i post pdf's :mad:

The first pancake hood was actually built by a pipeliner in Bakersfield ca, the goggle as you called it is a balsa wood box that you will custom sand...

Yea, the new support has the ecoating on it. Not shure if it acts like a weldthrough primer or not. I've heard yes, and I've heard no, WTF?

GOOD VIDEO http://www.walter.com/Walter/en-us/abrasives/grinding/angle-grinders-aluminum/1-4-alu

It is a pdf file inside a zip file. I tried to copy it as a pdf and upload it directly but I get a message that it is larger than the web site will...

it is all brick around it and the osb board was cut out 1 foot around it studs were replaced with metal studs and cement board is installed where the...

Any problem with your 400 gun on steel ?. That should tell you where the problem lies. B.J.

No he is making a support for his radiator. He wants to know if the factory coating on the stock radiator support is weldable. I'm gonna venture a...

I'm not sure I follow you. Are you planning to weld on the radiator?

No matter how deep the firebox is the wall ARE going to get hot. Regardless of how deep the firebox is the walls are going to conduct heat and...

I tried everything, either I get moisture or their isn't enough product. My nozzle's orfice is a 3/32, I been thinking about buying a bigger hose...

snowbird when I click on the link I get a message that windows photo viewer can't read the file????? It happens a lot I don't know how to fix it...

I do mainly architectural now and when grinding aluminum flap wheels are much to easy to create a low spot. Use sanding discs with stiff rubber...

keep all you old flapper wheels the older they get the better they are .i use new ones to take off and smooth the welds and then i put on an old one...

Thanks cope, a lot of good information there. :)

I saw this thread the other day, and wanted to give you a link. I know you're not in Houston, but this is an interesting site and group. ...

My dad had a great idea when he did his home remod. Living room gas logs were beside kitchen and had hot water line close to the joining of fireplace...