S/D 70 SERIES Accessories |
Stock# |  |
 |
 | Carrying CartA utility cart for power source, wire feeder, and other miscellaneous welding supplies. Height: 34 in (863 mm) Width: 30 in Depth: 17 in (864 x 762 x 432 mm). Lower tray height: 9 in (228 mm). Maxstar, XMT, and wire feeder units fit nicely on this cart. S | 056301 | $346.00 |  |
 | Feeder CartA low-profile, creeper cart which allows the operator to easily move the feeder around the work area. Shipped disassembled. | 142382 | $323.00 | |
|---|---|---|---|---|---|
14-Pin Extension Cords25 ft (7.6 m) | 043690 | $370.00 | | ||
14-Pin Extension Cords50 ft (15 m) | 043691 | $342.00 | | ||
Control Detachment Kit, 10 ft (S-75 Series)25 ft (7.6 m) for all S-74S model feeders. Allows separation of the control module from the wire drive assembly and base. | 194913 | $377.00 | | ||
Control Detachment Kit, 10 ft (S-75 Series)10 ft (3m) for all S-75 model feeders. Allows separation of the control module from the wire drive assembly and base. (Field Installed) | 194914 | $311.00 | | ||
Control Detachment Kit, 25 ft (D-75 Series)25 ft (7.6 m) for all D-75 model feeders. Allows separation of the control module from the wire drive assembly and base. | 194995 | $632.00 | | ||
Conversion KitConverts S-74S to S-74D. Preset Voltage and Wire Feed Speed Meters. | 194989 | $689.00 | | ||
Conversion KitConverts D-74S to D-74D | 194992 | $633.00 | | ||
Conversion KitConverts S-74S Wire Feeder to a Full-Featured S-74DX. | 195010 | $1106.00 | | ||
Conversion KitConverts D-74S wire feeder to a Full Featured D-74DX. | 195041 | $1515.00 | |  | DSS-8 Dual Schedule Switch, 15 ftA two-position trigger switch which attaches to the gun handle and is used in place of the standard trigger for dual scheduling. (For 75DX models only) | 079693 | $197.00 | |
 | DSS-9 Dual Schedule Switch, 15 ftA two-position slide switch which attaches to the gun handle and is used to select the desired welding condition for dual schedule purposes. The gun trigger operates as a standard gun trigger. (For 75DX models only.) | 071833 | $109.00 | |
Extension Cords for Remote Controls (24 VAC Wire Feeders), 25 ftFor 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.) | 122973 | $183.00 | | ||
Extension Cords for Remote Controls (24 VAC Wire Feeders), 50 ftFor 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.) | 122974 | $233.00 | | ||
Extension Cords for Remote Controls (24 VAC Wire Feeders), 75 ftFor 14-pin remote contactor and voltage controls/24 VAC wire feeders. Provides 14-pin, 24 VAC, plug to a 14-pin socket. (Not for XR-M, Optima™, or 60M series feeders.) | 122975 | $283.00 | | ||
Hanging Bail (Electrically Isolated)Suspends feeder over the work area. | 058435 | $99.00 | | ||
Remote Voltage ControlNon-digital control for S-75S model. (Field installed) | 194988 | $60.00 | | ||
Remote Voltage ControlNon-digital control for D-75S model. (Field installed) | 194991 | $95.00 | | ||
Spool AdapterFor use with 14 lb (6.4 kg) spool of Lincoln self-shielding wire. | 047141 | $75.00 | |  | Spool Cover (Left Side/Single or Dual)For 12 in (304 mm) spool. Spool Cover cannot be installed if the wiredrive assembly is in a rotated position. | 057607 | $134.00 | |
Turntable AssemblyAllows feeder to rotate as operator changes work position. Reduces strain and bending of gun cable. | 146236 | $211.00 | | ||
Wire Reel AssemblyFor 60 lb (27.2 kg) coil of wire. | 108008 | $192.00 | |  | Wire Straightener For .035 - .045 in (0.9 - 1.1 mm) WireFor 60 and 70 Series Feeders - Helps reduce the cast in wire to improve wire feeding performance and increase the service life of the gun liner and contact tip. | 141580 | $316.00 | |
| Wire Straightener For 1/16 - 1/8 in (1.6 - 3.2 mm) WireFor 60 and 70 Series Feeders - Helps reduce the cast in wire to improve wire feeding performance and increase the service life of the gun liner and contact tip. | 141581 | $316.00 | |
KIT,DRIVE ROLL .035 V-GR 4 ROLL | 151026 | $56.68 | | ||
KIT,DRIVE ROLL .045 V-GR 4 ROLL | 151027 | $56.68 | | ||
KIT,DRIVE ROLL .045 VK-GR 4 ROLL | 151053 | $86.53 | | ||
KIT,DRIVE ROLL .047 U-GR 4 ROLL | 151037 | $79.12 | | ||
KIT,DRIVE ROLL 1/16 U-GR 4 ROLL | 151039 | $80.29 | | ||
KIT,DRIVE ROLL 1/16 VK-GR 4 ROLL | 151055 | $86.53 | | ||
KIT,DRIVE ROLL 5/64 VK-GR 4 ROLL | 151057 | $87.38 | | ||
 |
 |
||||
* All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment.
