Miller Electric

TIG

Home » Products » TIG » Dynasty® 350

Dynasty® 350

The Dynasty 350 is a powerful, compact power source capable of welding up to 5/8” aluminum. Total arc control provides maximum productivity and weld quality while conserving energy compared to traditional welding machines.

Dynasty 350
  • Dynasty 350
Base Model Starting at:
$7,837.00 List Price (US$)

Additional Models and Pricing

AC and DC TIG Features

AC TIG Features
Independent amplitude/amperage control allows EP and EN amperages to be set independently to precisely control heat input to the work and electrode.
 
Extended AC balance controls the amount of oxide cleaning (amperage time in EN) which is essential for high quality welds on aluminum.
 
AC frequency (20–400 hz) controls the width of the arc cone and the force of the arc.
DC TIG Features
Exceptionally smooth and precise arc for welding exotic materials.
 
High-speed DC TIG pulse controls - Pulse frequency capable of pulsing 5000 pulses per second. Pulsing adds arc stability, reduces heat input and warpage and can increase travel speeds. Other parameters include peak amperage, peak time and background amperage.

Blue Lightning™ - High Frequency Arc Starter 

For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.

120 V Auxiliary Power

The  Dynasty 350 has a 120 V auxiliary power receptacle for the cooling system or small tools.

Stick Features (AC/DC)

Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
 
Hot Start™ adaptive control provides positive arc starts without sticking.
 
AC frequency control adds additional stability when Stick welding in AC for smoother welds.

AC Waveforms

AC Waveforms
Advance Squarewave provides a fast freezing puddle, deep penetration, and fast travel speeds.
 
Soft Squarewave is used for a soft buttery arc with maximum puddle control and good wetting action.
 
Sine wave is for customers that like a traditional arc. It is quiet with good wetting.
 
Triangular wave reduces the heat input and is good on thin aluminum. It provides fast travel speeds.

Program memory

Program memory features 9 independent program memories that maintain/save your parameters.

Meter Calibration

Allows meters to be calibrated for certification.

Auto-Line Power Management Technology

Auto-Line Power Management Technology
Allows for any input voltage hookup (208 - 575 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.
 
ProcessesTIG (GTAW) DC 
TIG (GTAW) AC 
Pulsed TIG (GTAW-P) AC 
Pulsed TIG (GTAW-P) DC 
Stick (SMAW) DC 
Stick (SMAW) AC 
Air Carbon Arc Cutting and Gouging (CAC-A) 
Material Type
Max 5/8 in (15.9 mm)
Steel
Min 0.012 in (0.3 mm) 		Max 5/8 in (15.9 mm)
Aluminum
Min 0.015 in (0.38 mm)
General specificationsInput Power
208-575 V, 3- or 1-Phase Power
Rated Output
3-Phase: 300 A at 32 V, 60% Duty Cycle
Single-Phase: 225 A at 29 V, 60% Duty Cycle
Welding Amperage Range
3 - 350 Amps
Net Weight135.5 lb (61 kg) 268.5 lb (122 kg), with TIGRunner®
ApplicationsAviation 
Fabrication 
Pipe Fabrication 
Ship/Boat 
Product Literature
Spec Sheet - English
Spec Sheet - Spanish
Printable Overview
Quick Reference Sheet - English
Quick Reference Sheet - Spanish
Quick Reference Sheet - French 		 
Warranty True Blue With the best coverage in the industry, Miller's True Blue® Warranty [PDF] delivers unparalleled peace-of-mind.

Models

 Stock # Manufacturer List Price US$    
Dynasty 350 (Auto-Line 208-575 V): Machine Only 907204 $7837.00  
  View Package Details      
  View Package Details      
  Comes Complete With:  
 
Dynasty 350 power source
 
  Quick Reference Guide: English | Spanish  
  8 ft (2.4 m) primary cord  
  (2) Dinse 50 mm connectors  
  DVD set-up video (251116)
 
  Note - TIG torch adapter must be ordered separately.  
  Dynasty 350: TIGRunner Pkg (Water Cooled)  907204001 $9644.00  
  View Package Details      
  View Package Details      
  Comes Complete With:  
 
Dynasty 350 power source (907204)
  
  Quick Reference Guide: English | Spanish  
  8 ft (2.4 m) primary cord  
  DVD set-up video (251116)  
  Coolmate 3.5 Coolant System  
  Cart with the following features:  
  - Single cylinder rack  
  - Foot pedal holder  
  - (3) Cable/torch holders  
  - (2) TIG electrode filler holders
 
Note: Torch package, Dinse 50 mm connector (1 male) (042418) and coolant sold separately.
  
  Dynasty 350: Complete Pkg w/Foot Control (Water Cooled)  951401 $10656.00  
  View Package Details      
  View Package Details      
  Comes Complete With:  
 
Dynasty 350 power source (907204)
  
  Quick Reference Guide: English | Spanish  
  8 ft (2.4 m) primary cord  
  DVD set-up video (251116)  
  Coolmate 3.5 Coolant System  
  Cart with the following features:  
  - Single cylinder rack  
  - Foot pedal holder  
  - (3) Cable/torch holders  
  - (2) TIG electrode filler holders  
  RFCS-14 HD Foot Control (194744)  
  25ft (7.6 m) Weldcraft CS310 water-cooled torch  
  Torch cable cover
CS310AKC torch accessory kit includes: shielding cups, collets, collet bodies, and 2% cerium tungsten electrodes (1/16, 3/32, and 1/8 in)
  
  Smith regulator/flowmeter HM2051A-580  
  Gas hose(regulator to machine)  
  15 ft (4.6 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector  
  4 gallons of pre-mixed low-conductivity coolant (043810)  
  Dynasty 350: Complete Pkg w/Wireless Foot Control (Water Cooled)  951402 $11220.00  
  View Package Details      
  View Package Details      
  Comes Complete With:  
 
Dynasty 350 power source (907204)
  
  Quick Reference Guide: English | Spanish  
  8 ft (2.4 m) primary cord  
  DVD set-up video (251116)  
  Coolmate 3.5 Coolant System  
  Cart with the following features:  
  - Single cylinder rack  
  - Foot pedal holder  
  - (3) Cable/torch holders  
  - (2) TIG electrode filler holders  
  Wireless Remote Foot Control (300429)  
  25ft (7.6 m) Weldcraft CS310 water-cooled torch  
  Torch cable cover
CS310AKC torch accessory kit includes: shielding cups, collets, collet bodies, and 2% cerium tungsten electrodes (1/16, 3/32, and 1/8 in)
  
  Smith regulator/flowmeter HM2051A-580  
  Gas hose(regulator to machine)  
  15 ft (4.6 m) 1/0 weld lead with clamp (work or ground lead) and Dinse connector  
  4 gallons of pre-mixed low-conductivity coolant (043810)  
       

Most Popular Accessories

Stock# Manufacturer List Price US$   US and Canada Add to list

RCCS-14 Remote Contactor and Current Control (14-pin plug)

North/South rotary-motion fingertip control fastens to TIG torch using Velcro® straps. Includes 26.5 ft (8m) control cord. (For all Miller solid-state power sources after serial number JK674521.)

043688$233.00  

Low-Conductivity Antifreeze/Coolant

Sold in cases of four 1-gallon recyclable plastic bottles. Recommended for TIG and HF applications. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108°C). Also co

043810$25.00  

RMLS-14 Remote Switch (14-pin plug)

Momentary and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft(8 m) cord and plug. (For all Miller solid-state power sources after serial number JK674521.)

129337$177.00  

RMS-14 Remote On/Off Control (14-pin plug)

Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. (For all Miller solid-state power sources after serial number JK674521.)

187208$172.00  

RFCS-14 HD Foot Control (14-pin plug)

Heavy-duty foot pedal current and contactor control provides increased stability and durability. Reconfigurable cord can exit the front, back or either side of the pedal. Includes 20ft(6m) cord and plug.

194744$305.00  

ADAPTER,TORCH-INTNL STYLE WATER(#18,20)

195377$70.04  
 

Automation Interface Connection Kit

Provides control of power source welding parameters through a 28 pin receptacle. The 28 pin receptacle replaces the standard 14 pin receptacle and requires a PLC controller to operate the power source. Ideal for automated equipment integration.

195516$1244.00  

CABLE,EXTENSION 24 VAC 14 PIN 8C 25 FT

242208025$176.13  

CABLE,EXTENSION 24 VAC 14 PIN 8C 50 FT

242208050$263.68  

CABLE,EXTENSION 24 VAC 14 PIN 8C 80 FT

242208080$368.74  

RHC-14 REMOTE HAND CONTROL W/CABLE 20 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

242211020$271.00  

RHC-14 REMOTE HAND CONTROL W/CABLE 100 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 100 ft (6 m) cord and 14-pin plug.

242211100$439.00  
 

WELD CURRENT SENSOR

Detects when work clamp is not connected and prevents expensive damage to disconnect devices and input power cord and wiring.

300179$179.00  

310 A Water-Cooled Torch Kit

Includes 25 ft Weldcraft® torch, cable cover, torch accessory kit, Smith® regulator/flowmeter, 12 ft rubber gas hose, water-cooled Dinse torch adapter, and 12 ft weld lead with clamp and Dinse connector.

300183$695.00  
 View Accessories for 310 A Water-Cooled Torch Kit   
 View Accessories for 310 A Water-Cooled Torch Kit   
 NOZZLE, ALUMINA, STUBBY, #413N08$2.27  
 NOZZLE, ALUMINA, STUBBY, #513N09$2.27  
 NOZZLE, ALUMINA, STUBBY, #613N10$2.27  
 NOZZLE, ALUMINA, STUBBY, #713N11$2.27  
 NOZZLE, ALUMINA, STUBBY, #813N12$2.27  
 NOZZLE, ALUMINA, STUBBY, #1013N13$2.27  
 WELDCRAFT COLLET, 0.020" (0.5MM)13N20$1.84  
 WELDCRAFT COLLET, 0.040" (1.0MM)13N21$1.84  
 WELDCRAFT COLLET, 1/16" (1.6MM)13N22$1.84  
 WELDCRAFT COLLET, 3/32" (2.4MM)13N23$1.84  
 WELDCRAFT COLLET, 1/8" (3.2MM)13N24$1.84  
 WELDCRAFT COLLET BODY, 0.020" (0.5MM)13N25$3.62  
 WELDCRAFT COLLET BODY, 0.040" (1.0MM)13N26$3.62  
 WELDCRAFT COLLET BODY, 1/16" (1.6MM)13N27$3.62  
 WELDCRAFT COLLET BODY, 3/32" (2.4MM)13N28$3.62  
 WELDCRAFT COLLET BODY, 1/8" (3.2MM)13N29$3.62  
 GAS LENS, LARGE, .020-.040"45V0204S$45.18  
 GAS LENS, LARGE, 1/16"45V116S$45.18  
 GAS LENS, SMALL, .020"45V41$9.81  
 GAS LENS, SMALL, .040"45V42$9.81  
 GAS LENS, SMALL, 1/16"45V43$9.81  
 GAS LENS, SMALL, 3/32"45V44$9.81  
 GAS LENS, SMALL, 1/8"45V45$9.81  
 GAS LENS, LARGE, 3/32"45V64S$45.18  
 GAS LENS NOZZLE,SM. ALUMINA #453N58$2.33  
 GAS LENS NOZZLE,SM. ALUMINA #553N59$2.33  
 GAS LENS NOZZLE,SM. ALUMINA #653N60$2.33  
 GAS LENS NOZZLE,SM. ALUMINA #753N61$2.33  
 GAS LENS NOZZLE,SM. ALUMINA #853N61S$2.33  
 GAS LENS NOZZLE,LG. ALUMINA #12 10 Per Pkg53N87$5.51 Buy Now
 GAS LENS NOZZLE,LG. ALUMINA #10 10 Per Pkg53N88$5.51 Buy Now
 GAS LENS NOZZLE,LG. ALUMINA #8 10 Per Pkg57N74$5.51 Buy Now
 GAS LENS NOZZLE,LG. ALUMINA #6 10 Per Pkg57N75$5.51 Buy Now
 WELDCRAFT INSULATOR, NOZZLE598882$3.14  
 GAS LENS, LARGE, 1/8"995795S$45.18  
 CONSUMABLE KIT,WITH CERIATED TUNGSTENAK4C$81.45  
 WELDCRAFT BACK CAP, LONGCS110-BCL$16.25  
 WELDCRAFT BACK CAP, MEDIUMCS110-BCM$13.78  
 WELDCRAFT BACK CAP, SHORTCS110-BCS$13.92  
 WELDCRAFT TORCH BODY, 310A, W/CCS310A$134.66  
    

Runner Cart

Designed to accommodate the Dynasty or Maxstar 350 or 700 power sources and the Coolmate 3.5 Cooler. Cart features: single cylinder rack, foot pedal holder, 3 cable/torch holders and 2 filler holders.

300244$739.00  

Coolmate™ 3.5

Designed to integrate with the Dynasty and Maxstar 350 and 700 power sources. For use with water-cooled torches rated up to 600 amps. 3.5 gallon capacity.

300245$1068.00  
 View Accessories for Coolmate™ 3.5   
 View Accessories for Coolmate™ 3.5   
 Aluminum Protecting Antifreeze/Coolant043809$25.00  
 Low-Conductivity Antifreeze/Coolant043810$25.00  
    

WIRELESS FOOT CONTROL AND 14 PIN RECEIVER

Improves productivity, eliminates clutter and cord tangles in the work area. Eliminates cord failure and associated downtime/repair costs and extends the welding range without adding cord extensions.

300429$800.00 Buy Now

Wireless Hand Control and 14 Pin Receiver

Improves productivity, eliminates clutter and cord tangles in the work area. Eliminates cord failure and associated downtime/repair costs and extends the welding range without adding cord extensions. Designed for tig, stick, and volt sensing wire feeder

300430$1060.00 Buy Now
       
18

Close
Powerline Financing