DYNASTY 700 Accessories |
Stock# |  |
 |
||
|---|---|---|---|---|---|
Automation Interface Connection KitProvides control of power source welding parameters through a 28 pin receptacle. The 28 pin receptacle replaces the standard 14 pin receptacle and requires a PLC controller to operate the power source. Ideal for automated equipment integration. | 195516 | $1130.00 |  | ||
WELD CURRENT SENSORDetects when work clamp is not connected and prevents expensive damage to disconnect devices and input power cord and wiring. | 300179 | $155.00 | |  | Runner CartDesigned to accommodate the Dynasty or Maxstar 350 or 700 power sources and the Coolmate 3.5 Cooler. Cart features: single cylinder rack, foot pedal holder, 3 cable/torch holders, 2 filler holders, and a drawer for tungsten and consumables. | 300244 | $675.00 | |
TORCH,TIG 400A 25FT WATER COOLED AND ACCYS | 300186 | $863.00 | | ||
WELDCRAFT WATERCOOLED, 400 A,25ft | WP18SC25RM | $364.41 | |  | Coolmate™ 3.5Designed to integrate with the Dynasty and Maxstar 350 and 700 power sources. For use with water-cooled torches rated up to 600 amps. 3.5 gallon capacity. | 300245 | $968.00 | |
 | Low-Conductivity Antifreeze/CoolantSold in cases of four 1-gallon recyclable plastic bottles. Recommended for TIG and HF applications. Miller coolants contain a base of ethylene glycol and deionized water to protect against freezing to -37°F (-38°C) or boiling to 227°F (108° | 043810 | $22.00 | |
 | RFCS-14 HD Foot Control (14-pin plug)Heavy-duty foot pedal current and contactor control provides increased stability and durability. Reconfigurable cord can exit the front, back or either side of the pedal. Includes 20ft(6m) cord and plug. | 194744 | $279.00 | |
 | RCCS-14 Remote Contactor and Current Control (14-pin plug)North/South rotary-motion fingertip control fastens to TIG torch using VelcroŽ straps. Includes 26.5 ft (8m) control cord. (For all Miller solid-state power sources after serial number JK674521.) | 043688 | $213.00 | |
 | RMLS-14 Remote Switch (14-pin plug)Momentary and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft(8 m) cord and plug. (For all Miller solid-state power sources after serial number JK674521.) | 129337 | $162.00 | |
 | RMS-14 Remote On/Off Control (14-pin plug)Momentary-contact switch for contactor control. Rubber-covered pushbutton dome switch ideal for repetitive on-off applications. Includes 26.5 ft (8 m) cord and 14-pin plug. (For all Miller solid-state power sources after serial number JK674521.) | 187208 | $157.00 | |
 | RHC-14 REMOTE HAND CONTROL W/CABLE 20 FTMiniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. | 242211020 | $248.38 | | |
| RHC-14 REMOTE HAND CONTROL W/CABLE 100 FTMiniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 100 ft (6 m) cord and 14-pin plug. | 242211100 | $401.98 | | |
 | CABLE,EXTENSION 24 VAC 25 FT | 242208025 | $159.57 | | |
| CABLE,EXTENSION 24 VAC 50 FT | 242208050 | $239.05 | | |
| CABLE,EXTENSION 24 VAC 80 FT | 242208080 | $334.43 | | |
 |
 |
||||
* All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment.
