Dynasty® 200 Series Competitive Comparison
Lincoln Invertec V205T |
The Power of Blue® Payoff |
||||||
| Autoline 115-460 VAC ± 10% single or three phase |
Yes | Yes | No 115/230 VAC only |
Take the Dynasty 200 anywhere - as long as you have 120-460 (± 10%) VAC 1 or 3 Phase, the Dynasty will automatically connect to the available power. | |||
| TIG input Amps 115V | 27 Amps | 27 Amps | 34 Amps | The V205-T draws 7 amps more at the same output 150 A @ 17 V | |||
| Duty Cycle Rating TIG (115V) 1-Phase TIG (230V) 1-Phase TIG (230-460V) 3-Phase |
100% 100A/14V 60% 150A/17V 60% 150A/16V |
100% 100A/14V 60% 150A/17V 60% 150A/16V |
100% 100A/14V 60% 170A/16V Not available |
Similar Similar The Dynasty 200 will work on more job sites. |
|||
| AC TIG Amperage Range | 5-200 Amps | 5-200 Amps | 6-200 Amps Above 85Hz (AC output) the Invertec is limited to 170 amps. |
In conjunction with the AC frequency control, the Dynasty 200 will weld thicker material on AC. | |||
| DC TIG Amperage Range | 1-200 Amps | 1-200 Amps | 6-200 Amps | The Dynasty offers better low end amperage control on Stainless or Carbon steel. | |||
| Adjustable Start Parameter Time / Amperage |
Yes Time = 1-200ms Amperage = 1-200A |
Yes Time = 1-200ms Amperage = 1-200A |
No | Allows starts to be tailor made for any TIG application. | |||
| Pulse Control (AC) | No | 0.2 - 500PPS | .25 - 2.5PPS | Reduce heat input and gain greater control of the weld puddle with the full range of the Dynasty 200 DX | |||
| Pulse Control (DC) | No | 0.2 - 500PPS | 0.25 - 500PPS | Similar | |||
| Full Feature Sequencer w/ Triggering Options | No | Yes | No | Use for semi-automated or fully automated set-ups (i.e. weld lathes or turntables). | |||
| Spot Time | No | Yes | No | Achieve uniform and repeatable spot welds. | |||
| Duty Cycle Rating Stick (115) 1-Phase Stick (230V) 1-Phase Stick (230-460V) 3-Phase |
60% 100A @ 25V 60% 130A @ 26V 60% 130A @ 26V |
60% 100A @ 25V 60% 130A @ 26V 60% 130A @ 26V |
60% 90A @ 23.6V 60% 150A @ 26V Not Applicable |
Similar Similar Use the Dynasty 200 on more job sites. |
|||
| EXX10 Arc Performance | Excellent | Excellent | Not Recommended | Use the Dynasty 200 for all Stick applications, 200 amps and less. Excellent for code work. | |||
| Adaptive Hot Start | Yes | Yes | No | Provides exceptional arc starting for all Stick applications. | |||
| Low OCV for Stick Starts | Yes (5-10 volts) | Yes (5-10 volts) | No (54 volts) | Limits the open circuit voltage during Stick welding to just 10 volts. | |||
| Dual Digital Meters | Yes | Yes | No | Allows constant monitoring of voltage and amperage while welding. | |||
| Process Memory Recall | Yes | Yes | No | Setting up the Dynasty is fast and easy. The Invertec requires working with a complex and frustrating interface. | |||
| AC Balance Control | 30-99% | 30-99% | 35-85% | The Dynasty offers a greater range of Balance Control. More oxide cleaning if needed or a more focused arc for greater precision. | |||
| AC Frequency Control | 20-250 Hz | 20-250 Hz | 20-150 Hz Above 85 Hz-the Invertec is limited to 170 amps. |
Weld thicker material and gain greater arc control with the Dynasty 200. | |||
| AC/DC Lift Arc | Yes (operates off of 5-10 volts) |
Yes (operates off of 5-10 volts) |
No (DC only) |
The low voltage of Lift Arc reduces the risk of tungsten inclusions and produces fast, crisp starts even on aluminum. The V205T Touch Start uses a minimum of 54 volts. The result is sticky starts with a high rate of tungsten contamination. It cannot be used on aluminum. | |||
| Fan on Demand | Yes | Yes | No | This reduces the amount of dirt pulled into the machine, prolongs the life, reduces maintenance and reduces noise. | |||
| Parameter Protection Lockout | Yes | Yes | No | Limits parameter adjustment to only those parameters established by the Welding Engineer or other qualified personnel. Ensures that the weld procedure will be followed. | |||
| Arc Hour Counter | Yes | Yes | No | Keep track of total hours or on a particular job. | |||
| Arc Cycle Counter | Yes | Yes | No | Keep track of total arc starts. | |||
| Help Messages | Yes | Yes | No | Aids in set-up and troubleshooting. | |||
