SubArc AC/DC Digital - Welding Power Sources
Miller's New SubArc AC/DC Digital Series are high output, three-phase squarewave AC/DC power sources. They provide AC or DC welding power in standalone or multi-arc configurations for long, continuous welds on thick structural weldments, or for manufacturing pipe.
List Price (US$)
Weld Output Range
Miller's SubArc AC/DC 1000 Digital. AC welding output enables the SubArc AC/DC to be used in tandem arc welding systems with a DC lead arc and AC trailing arc, or with AC / AC arc combinations. Using multiple arcs increases
deposition rate, resulting in shorter welding cycles for thick weldments without compromising quality.
All AC balance control modes can be set on the SubArc Interface Digital. The easy-to-understand interface includes two
Easier setup and operation. The SubArc Digital Series Interface controls recognize the power source
and wire drive connected, and automatically configure the system for proper operation.
The easy-to understand interface provides the operator with the necessary controls to set process parameters and
Low-voltage accessory operation and improved environmental protection. The new Digital Series accessories are powered with 24 VAC control voltage from the power source. All power sources, interface controls and wire drives are IP-23 rated providing a high level of protection for harsh environments.
Easy to integrate. Our new SubArc power sources are easy to integrate by using a standard Modbus® connection. Different levels of integration are possible, from simple remote operation to more complex automated systems.
Easy Paralleling of two machines to increase maximum welding current is simply done by connecting the paralleling cable from the first unit to the second unit. Daisy chaining multiple machines to gain higher output is done in the same way. No special tools, laptop or software needed... plug and play.
Simple Tandem setup. To use two or more AC arcs, the arc must be phase shifted to prevent arc to arc interaction.
Improved flux delivery system. Our new SubArc Flux Hopper utilizes a flux valve mechanism that assures continuous delivery of flux to the arc. The unique valve design provides a barrier between the flux and actuation device to prevent jamming of the solenoid actuator due to dust and debris. A sight glass is provided on the front of the flux hopper allowing the weld operator to visually monitor the remaining flux in the hopper.