Miller Electric

Limited Availability

Home » Products » Limited Availability » Maxstar® 200 TIG Welders

This product is not currently available in all areas, please
check with your local distributor for details.

Maxstar® 200 TIG Welders

Industry standard - Miller Electric pioneered the Maxstar-type market, now we've perfected it. Maxstar 200 Series provides a solution for every user's needs; from simple to fully automated.

Maxstar 200 SD
  • Maxstar 200 SD
  • Maxstar 200 SD Front Panel

Three Models Available

Maxstar SD - Provides the basic features that are required for most TIG or Stick welding applications.
Maxstar DX - When the job demands greater control the DX provides pulse on/off, pulse frequency, peak % time, background amps, initial amps, initial slope time, final slope time, and final amperage control.
Maxstar LX - With the Automation Interface Connector, the integrator can quickly interface to the output disable, weld start/stop, gas start/stop inputs, valid arc, pulse lock out, and end of weld sequence outputs.
*See Models & Pricing tab for available packages

Wireless Remote Control Compatible

Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Learn more >>

Lift-Arc™

Lift-Arc™ starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency.

Stick Features (DC)

Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010.
 
Hot Start™ adaptive control provides positive arc starts without sticking.
 
Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers.

Blue Lightning™ - High Frequency Arc Starter 

For more consistent non-contact starts and greater reliability compared to traditional HF arc starters.

Auto-Line Power Management Technology

Auto-Line Power Management Technology
Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power.

DC TIG Features

DC TIG provides exceptionally smooth and precise arc for welding exotic materials.

 

Models

Stock #

XMT® 350 VS ArcReach™ 907224002

XMT® 450 VS ArcReach™ 907481002

SuitCase® X-TREME™ 8VS ArcReach™ with Bernard® S-Gun™ 951588

SuitCase® X-TREME™ 8VS ArcReach™ with Bernard® Q300 Gun 951584

SuitCase® X-TREME™ 12VS ArcReach™ with Bernard® S-Gun™ 951589

SuitCase® X-TREME™ 12VS ArcReach™ with Bernard® Q300 Gun 951581

Product Literature
Spec Sheet - English
Spec Sheet - Spanish
 
ProcessesTIG (GTAW) DC 
Pulsed TIG (GTAW-P) DC - Not available on SD model 
Stick (SMAW) DC 
Air Carbon Arc Cutting and Gouging (CAC-A) 
Material Type
Max 1/4 in (6.4 mm)
Steel
Min 0.004 in (0.1 mm)
General specificationsInput Power
Requires 3- or 1-Phase Power
Rated Output
TIG
175 A at 17 V, 60% Duty Cycle (1 or 3-Phase)
150 A at 16 V, 70% Duty Cycle (115 VAC)
125 A at 15 V, 100% Duty Cycle (115 VAC)
 
Stick
150 A at 26 V, 60% Duty Cycle (1 or 3-Phase)
125 A at 25 V, 50% Duty Cycle (115 VAC)
90 A at 24 V, 100% Duty Cycle (115 VAC)
Welding Amperage Range
1 - 200 Amps
Net Weight37 lb (16.8 kg)
ApplicationsAviation 
Fabrication 
Mechanical Contracting 
Ship/Boat 

Close
Powerline Financing