Spectrum® 625 X-TREME™ Competitive Comparison
Hypertherm Powermax 45 |
ESAB Powercut 550 |
Comments |
|||||
| Output Amperage | 40A |
45A |
35A |
||||
| Input Voltage | 208/230V 1PH |
208/230V 1PH |
208/230V 1PH |
||||
| Input Voltage Fluctuation | LVC™ (Line Voltage Compensation) 187V to 264V |
Boost Conditioner |
Not Advertised |
Regulated peak power supplies steady cuts and outstanding end of cut performance under variable input line conditions. | |||
| Duty Cycle | 50% @ 40A |
50% @ 45A |
40% @ 35A |
||||
| Size & Weight (H x W x D) | 9" x 5.5" x 13.25"
22 lbs |
13.7" x 6.75" x 16.75" 37 lbs |
14.75" x 6" x 14" 35 lbs |
The Spectrum 625 X-TREME is 50% smaller (volume) and 40% lighter (weight) than it's competitor. | |||
| Recommended or Rated Cut |
5/8" @ 12 IPM |
1/2" |
1/2" |
The Spectrum 625 X-TREME is recommended for 5/8" and under mild steel hand held cutting. | |||
| Factory Pre-Set Air and Automatic air regulation for cutting and gouging | YES |
NO |
NO |
The 625 X-TREME automatically compensates for input pressure variation from 90 to 120 psi to provide constant recommended torch pressure and automatically reduces air output for gouging applications providing optimum performance during cutting and gouging. Competitive units need to be adjusted manually. | |||
| Expanded Metal Capability | Auto-Refire™ (Automatic) |
Manual Control Switch |
Not Advertised |
Provides ultimate convenience by automatically controlling the pilot arc when cutting expanded metal or multiple pieces of metal. Competitors offer manual switches or toggles. | |||
| Wind Tunnel Design™ | YES |
Similar |
NO |
Protects sensitive internal components from harsh environmental dust for improved product reliability. | |||
| Fan-On Demand™ | YES |
NO |
NO |
Fan initiates when the torch trigger is pulled and turns off as needed to reduce the amount of airborne dust/dirt pulled through the unit thus improving product reliability. | |||
| Heavy-Duty, Industrial Work Clamp (ground) | YES |
NO |
NO |
Most rugged and durable clamp offered in the plasma hand held market for better grounding potential on rusty or painted material. | |||
| Protective Storage Case | X-CASE included |
NO |
NO |
X-CASE provides ultimate protection during transport and storage. Additional space for consumable box, gloves, eye protection, etc. | |||
| Operation on 10,000 Watt Miller Bobcat and Trailblazer Generator | YES 1/2" mild steel capacity at 40A |
YES |
Not Advertised |
Premier mobility and versatility for cutting in remote locations on generator power from our Miller Bobcat™ and Trailblazer®. | |||
