Spectrum® 625 Competitive Comparison
Hypertherm Powermax 600 |
Thermal Cutmaster 51 |
ESAB 550 |
|||||
| Input Voltage | 208/230 V 1 PH +/- 15% | 208 V 1 PH 240 V 1 PH 230 V 3 PH 400 V 3 PH 480 V 3 PH |
208-230 V 1 PH 400 V 3 PH 460 V 1 PH/3 PH |
208/230 1/3 PH 400 3 PH |
|||
| Primary Power Draw | 208 V - 33A 230 V - 30 A 1 PH |
208 V - 46 A - 1PH 240 V - 40 A - 1PH 230 V - 17 A - 3PH 400 V - 9.7 A - 3PH 480 V - 12 A - 3PH |
208 V - 39 A 230 V - 37 A 400 V - 12 A 460 V - 18/12 A |
208 V - 29 A 230 V - 17 A |
|||
| Duty Cycle | 50% @ 40 A | 50% @ 40 A | 40% @ 40 A | 40% @ 35 A | |||
| Wind Tunnel Technology™ | Yes | No | No | No | |||
| Fan-On Demand™ | Yes | No | No | No | |||
| Pilot Arc Start | Yes | Yes | Yes | High Frequency | |||
| Advertised Cut | 1/2 in |
1/2 in | 1/2 in | 1/2 in | |||
| Dimensions HxWxD | 15-1/4 in x 9-5/8 in x 17-1/4 in (387 x 244 x 438 mm) |
17 in x 9.5 in x 20 in (432 x 241 x 508 mm) |
16.4 x 10.8 x 22.5 in (416 x 273 x 571 mm) |
12 in x 6 in x 14 in (322 x 156 x 362 mm) |
|||
| Weight | 57 lb (25.9 kg) | 47 lb (21.3 kg) | 58 lb (26.3 kg) | 35 lbs (16 kg) | |||
| Torch Length | 25 ft Standard 50 ft Optional |
15 ft Standard 25 and 50 ft Optional |
25/50 ft | 25 ft | |||
| Consumable Offering | Shielded, Extended, Gouging | Shielded, Extended, Gouging | Standard, Gouging | Standard | |||
*What is the ambient temperature at which Miller rates their duty cycles? 104°F (40°C). Miller products are tested tough. The duty cycle of a machine tends to go down as the temperature increases. We rate our products in high temperature conditions to ensure that you can rely on Miller product performance, especially if you work in hot environments. When comparing machine specifications, it is important that you know what ambient temperature was used while rating the duty cycle.
Competitive comparison data taken from Miller testing and literature published by competitors.
