Miller Electric

multiprocess

Home » Products » multiprocess » XMT® ArcReach™ Multiprocess Welding System

XMT® ArcReach™ Multiprocess Welding System

ArcReach provides remote control at the wire feeder without needing a control cable.

XMT 350 VS 450 VS ArcReach™ SuitCase X-TREME 8VS 12VS ArcReach™
  • XMT 350 VS 450 VS ArcReach™ SuitCase X-TREME 8VS 12VS ArcReach™
  • XMT 350 VS ArcReach™ Front Open
  • XMT 450 VS ArcReach™ Front Open

Increased Productivity

Increased Productivity
More arc-on time and reduced exposure to workplace hazards for operators can be realized using ArcReach because less time is spent going back to the welding power supply to set process and arc voltage.

Auto-Process Select™

System automatically changes to MIG/FCAW (with gas) if electrode positive polarity is detected or FCAW (no gas) if electrode negative polarity is detected, when ArcReach communication is established between the feeder and the XMT – reducing the need to access the power source.

Automatically Return to Panel Settings

System automatically returns to XMT setting when ArcReach communication is terminated. For example, if the XMT is set to gouging at 350 amps and an ArcReach feeder is connected, the XMT will go to a MIG/FCAW process. If the feeder is disconnected, the XMT will go back to its previous setting (gouging at 350 amps).

See how upgrading to ArcReach technology can increase your productivity and profits.

Improved Weld Quality

Improved Weld Quality
Operators can precisely set arc voltage at the feeder and monitor the actual arc voltage and current delivered to the weld using the digital meters on the feeder. This removes guesswork when it comes to adhering to weld procedures.

Remote Override of XMT

When an ArcReach feeder is connected to an XMT the feeder has full control and the XMT controls are disabled. While under ArcReach control, process and V/A adjustments are locked out, preventing accidental changes by personnel other than the welding operator.

Fleet Compatibility

ArcReach-equipped power sources and wire feeders work with non-ArcReach equipment; however the complete ArcReach benefit is only realized with the ArcReach system.

 

Models

Stock #

XMT® 350 VS ArcReach™ 907224002

XMT® 450 VS ArcReach™ 907481002

SuitCase® X-TREME™ 8VS ArcReach™ with Bernard® S-Gun™ 951588

SuitCase® X-TREME™ 8VS ArcReach™ with Bernard® Q300 Gun 951584

SuitCase® X-TREME™ 12VS ArcReach™ with Bernard® S-Gun™ 951589

SuitCase® X-TREME™ 12VS ArcReach™ with Bernard® Q300 Gun 951581

Product Literature
Spec Sheet (ENG)
Ship Building Brochure (PDF)
 
ProcessesMIG (GMAW) 
TIG (GTAW) 
Stick (SMAW) 
Flux Cored (FCAW) 
Air Carbon Arc Cutting and Gouging (CAC-A) 
General specificationsInput Power350: 3- or 1-Phase Power
450: 3-Phase Power
Rated Output350 Amps at 34 VDC, 60% Duty Cycle
450 Amps at 38 VDC, 100% Duty Cycle
Welding Amperage Range350: 10-425 Amps
450: 10-600 Amps
Net Weight350: 80 lb
450: 122 lb
MaxOpenCircuitVoltage350: 75
450: 90
General
(CAC-A)- 350: capable 5/16-inch (8mm) carbons
(CAC-A)- 450: capable 3/8-inch (9.5mm) carbons
Dimensions350: 17" High X 12.5" Wide X 24" Long
450: 17.25" High X 14.5" Wide X 27.125" Long
ApplicationsConstruction 
Ship/Boat 

Models

Stock # Manufacturer List Price US$    
       

Most Popular Accessories

Stock# Manufacturer List Price US$
     
0

Close
Powerline Financing