Miller Electric

KIT,DRIVE ROLL .040 V-GR 4 ROLL

Kit includes wire guides for 70 and 24A series feeders. Only 70 series guides shown in image.

BERNARD T GUN, 350 AMP 15FT .045 WIRE

Straight handled 350 Amp, 15ft gun for .045 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD T GUN, 350 AMP 15FT .052 WIRE

Straight handled 350 Amp, 15ft gun for .052 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD T GUN, 450 AMP 15FT .045 WIRE

Straight handled 450 Amp, 15ft gun for .045 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD T GUN, 450 AMP 15FT .052 WIRE

Straight handled 450 Amp, 15ft gun for .052 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD TGX GUN, 260 AMP 15FT .035 WIRE

Straight handled 260 Amp, 15ft gun for .035 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD TGX GUN, 260 AMP 15FT .045 WIRE

Straight handled 260 Amp, 15ft gun for .045 wire. Equipped with Tough Lock consumable system. Lifetime warranty on handles and switches.

BERNARD Q-GUN 300 AMP, 15FT .045 MILLER

Bernard Q-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .045 in (1.2 mm); Direct Plug: Miller

BERNARD Q-GUN 300 AMP, 15FT .045 MILLER

Bernard Q-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .045 in (1.2 mm); Direct Plug: Miller

BERNARD Q-GUN 400 AMP, 15FT .052 MILLER

Bernard Q-Gun; Amp: 400; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .052 in (1.4 mm); Direct Plug: Miller

BERNARD S-GUN 300 AMP, 15FT .045 MILLER

Bernard S-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .045 in (1.2 mm); Direct Plug: Miller

BERNARD S-GUN 300 AMP, 15FT .052 MILLER

Bernard S-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: .052 in (1.4 mm); Direct Plug: Miller

BERNARD Q-GUN 200 AMP, 15FT .035 MILLER

Bernard Q-Gun; Amp: 200; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Short - 45 degree; Contact Tip and Wire Size: Centerfire, .035 in (0.9 mm); Direct Plug: Miller

BERNARD Q-GUN 200 AMP, 15FT .045 MILLER

Bernard Q-Gun; Amp: 200; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Short - 45 degree; Contact Tip and Wire Size: Centerfire, .045 in (1.2 mm); Direct Plug: Miller

BERNARD Q-GUN 300 AMP, 15FT .045 STEEL FLUSH NOZZL

Bernard Q-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, Flush Nozzle, .045 in (1.2 mm); Direct Plug: Miller

BERNARD Q-GUN 300 AMP, 15FT .052 MILLER

Bernard Q-Gun; Amp: 300; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .052 in (1.4 mm); Direct Plug: Miller

BERNARD Q-GUN 400 AMP, 15FT .045 MILLER

Bernard Q-Gun; Amp: 400; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, .045 in (1.2 mm); Direct Plug: Miller

BERNARD Q-GUN 400 AMP, 15FT 1/16 MILLER

Bernard Q-Gun; Amp: 400; Cable Length: 15 ft (4.57 m); Handle and Trigger: Bernard style handle, Standard trigger; Neck: Rotatable, Medium - 45 degree; Contact Tip and Wire Size: Centerfire, 1/16 in (1.6 mm); Direct Plug: Miller

Carrying Handle

Feeder Cart

A low-profile, creeper cart which allows the operator to easily move the feeder around the work area. Shipped disassembled.

PSA-2 Control

Required when using power sources having only 115 VAC. ( Power sources without a 14-pin connection or a 24 volt transformer).

Voltage Control (22A)

MIGmatic™ M-25, 250 A, 15 ft, .035-.045 wire

250 amp model, compatible with all current Miller wire feeders and Millermatics. Comes with 15 ft (4.6 m) cord and is setup for .035 - .045 in wires.

Roughneck C-3015, 300 A, 15 ft

Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.

Roughneck C-4015 Gun 15FT .035-.045 Wire

Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.

Roughneck C-5015 Gun 15FT .052 - 1/16 Wire

Fully compatible with all current Miller wire feeders and Millermatics. They are also adaptable to other major brands of welding equipment.

CABLE,EXTENSION 24 VAC 14 PIN 8C 25 FT

CABLE,EXTENSION 24 VAC 14 PIN 8C 50 FT

CABLE,EXTENSION 24 VAC 14 PIN 8C 80 FT

CUSTOMER CONFIGURED BERNARD GUN

Configure your Bernard Mig gun at http://bernardwelds.com. Make sure you note the Bernard gun part number in your order notes. This Miller stock number will show up on your invoice and packing slip. Consult factory for Water-cooled gun pricing.

Customer Configured Bernard Gun (formerly Tregaskiss)

Configure your Bernard T Gun™ at http://www.bernardwelds.com/configure-my-gun-p152357-topSectionId-15753. Make sure you note gun part number in your order notes. This Miller stock number will show up on your invoice and packing slip. Consult facto

Digital Display (V/WFS)

Dual-Function, back-lit LCD digital meter with selector switch. Allows the wire feed speed to be preset in meters per min or inches per min. Voltage function will only moitor and display the arc voltage and can calibrated if required.

Hanging Bail (Electrically Isolated)

Suspends feeder over the work area.

Preflow/Postflow/Spot Control

Provides up to 5 seconds of spot weld time and has adjustable timers (0.25 to 5 seconds) for controlling gas flow prior to arc initiation and after completion of weld.

Turntable Assembly

Allows feeder to rotate as operator changes work position. Reduces strain and bending of gun cable.

Wire Reel Assembly

For 60 lb (27.2 kg) coil of wire.

Wire Straightener For .035 - .045 in (0.9 - 1.1 mm) Wire

For 60 and 70 Series Feeders and SAW4- Helps reduce the cast in wire to improve wire feeding performance and increase the service life of the gun liner and contact tip.

Wire Straightener For 1/16 - 1/8 in (1.6 - 3.2 mm) Wire

For 60 and 70 Series Feeders and SAW4- Helps reduce the cast in wire to improve wire feeding performance and increase the service life of the gun liner and contact tip.

KIT,DRIVE ROLL .023 V-GR 2 ROLL

KIT,DRIVE ROLL .030 V-GR 2 ROLL

KIT,DRIVE ROLL .035 VK-GR 2 ROLL

KIT,DRIVE ROLL .035/.045 V-GR 2 ROLL

KIT,DRIVE ROLL .035/.045 V-GR 4 ROLL

KIT,DRIVE ROLL .045 V-GR 2 ROLL

KIT,DRIVE ROLL .045 VK-GR 2 ROLL

KIT,DRIVE ROLL .045 VK-GR 4 ROLL

KIT,DRIVE ROLL .047 U-GR 2 ROLL

KIT,DRIVE ROLL .047 U-GR 4 ROLL

KIT,DRIVE ROLL .052 VK-GR 2 ROLL

KIT,DRIVE ROLL .052 VK-GR 4 ROLL

KIT,DRIVE ROLL .068-.072 VK-GR 2 ROLL

KIT,DRIVE ROLL 1/16 U-GR 2 ROLL

KIT,DRIVE ROLL 1/16 V-GR 2 ROLL

KIT,DRIVE ROLL 1/16 V-GR 4 ROLL

KIT,DRIVE ROLL 1/16 VK-GR 2 ROLL

KIT,DRIVE ROLL 1/16 VK-GR 4 ROLL

KIT,DRIVE ROLL 5/64 VK-GR 2 ROLL

KIT,DRIVE ROLL .030 V-GR 4 ROLL

KIT,DRIVE ROLL .035 U-GR 4 ROLL

KIT,DRIVE ROLL .035 V-GR 2 ROLL

KIT,DRIVE ROLL .035 V-GR 4 ROLL

KIT,DRIVE ROLL .035 VK-GR 4 ROLL

KIT,DRIVE ROLL .045 UC-GR 2 ROLL

KIT,DRIVE ROLL .045 V-GR 4 ROLL

KIT,DRIVE ROLL .052 V-GR 2 ROLL

KIT,DRIVE ROLL .052 V-GR 4 ROLL

KIT,DRIVE ROLL 1/16 U-GR 4 ROLL

KIT,DRIVE ROLL 1/16 UC-GR 2 ROLL

KIT,DRIVE ROLL 5/64 VK-GR 4 ROLL