XMT® 350 MPa Competitive Comparison
Lincoln V350 PRO-App |
Comments |
||||
| Output Range | 5-425 Amps | 5-425 Amps | Wide amperage range of output for significant flexibility. | ||
| Peak Amperage Capability | 500 Amps | 425 Amps | Improved Pulse Peak Amperage for enhanced performance on large diameter wire. | ||
| Output Rating | 350A & 60% | 350A & 60% | 350 Amps for more deposition and more carbon arc gouging capacity. | ||
| Input Current at 350 Amp output | 17.8 Amps 460 VAC |
23 Amps 460 VAC |
XMT-350 takes 25% less current! This enables smaller fuses/breakers. More arcs can operate on the limited primary current typical of construction sites. | ||
| Auto-Line™ | Yes | No | This Miller patented circuit enables any primary voltage (208-575 VAC) to power unit. Perfect for dirty or unreliable primary found in field applications. No manual linking, no moving parts! | ||
| Stick- 7018 Electrode | Excellent | Yes | |||
| Stick- 6010 Electrode | Excellent | Yes | Arc outages with Lincoln products. | ||
| Adaptive Hot Start™ for Stick | Yes | Manual Hot Start | Adaptive Hot Start automatically increases output amperage if needed, great start. | ||
| DC-TIG Scratch Start | Yes | Yes | |||
| DC-TIG Lift-Arc™ | Yes | Yes | Tungsten contamination-free TIG starting without the use of high-frequency. | ||
| Gas Valve Option (TIG) | Yes | Yes | Conveniently provides gas valve for TIG welding. Saves money by no longer requiring a gas valve in the torch. Reduces likelyhood of emptying gas cylander by operator that left torch valve in the open position after weld. | ||
| Automatic Post Flow (TIG) | Yes | — | Gas time automatically increases with amperage used. | ||
| Process Selector Switch | Yes Same as XMT |
Yes Push button |
All XMT models use an easy-to-set process selector switch, reducing the need to learn new controls. | ||
| MIG Arc | Excellent | Yes | Miller units have enhanced low-end performance for stainless steel and thin-metal performance. | ||
| Sure Start™ | Yes | No | Weld-end wire prep and optimal control of weld start condition reduces spatter and the associated cost of cleanup. | ||
| Pulse Capability | Non-Synergic | Non-Synergic | The XMT 350 MPa now enables arc length to be adjusted by arc voltage. This enables the operator to relate to pulse welding as though it is a MIG weld. | ||
| Advanced Arc Control | Sharp Arc | Power Mode | Enables total control of weld bead profile while pulse welding, providing custom arc performance with the hassle of manipulating individual pulse parameters. | ||
| Handles | Two on top | 1 top & 1 mid front | Miller's handles are ergonomically placed. | ||
| Power Efficiency | 87% | Comparable | Miller XMT's have remarkable electrical efficiency, saving money by reducing power consumption. | ||
| Weight | 80 lbs. | 81 lbs. | Lightest welder in this power class | ||
| Control Receptacle | Yes | Yes | Remote control used for wire feeders and remote foot adn fingertip controls. | ||
| Wind-Tunnel Technology™ | Yes | No | Protects electrical components and PC boards from contamination, significantly improving reliability by minimizing dirt buildup and maximizing cooling! | ||
| Fan-On-Demand™ | Yes | Fan latches "On" after unit is used, and stays on! | In dirty dusty environments, Fan-on-demand reduces amount of airborne contaminants pulled through the machine. Fan automatically turns off after unit is cool, saving electricity($). | ||
| Line Voltage Compensation | Yes +37% and -59% on 460 VAC Widest link-free primary range in the industry! | Yes +/- 10% | XMT 350 can compensate for more input power fluxuation (dirty power), than any other welding power supply. | ||
| Meters | One Volt/One Amp | One Volt/One Amp | Large dual meters display both volt and amps for quick easy viewing by operator. | ||
| On/Off Switch | Front | Front | Due to location of Lincoln switch, unit is very difficult to re-wire with recommended cord for single phase 208-230 VAC operation. | ||
| Control Cover Protection | Yes | Yes | Protects front controls from damage in rough conditions. | ||
| Primary Power Cord | Yes - 10ft. | Yes - 10ft. | Saves time in hooking up the primary cords. | ||
| Self Diagnostics | Yes | Yes | Error message displays on meters for ease of diagnosing if problem occurs with output. | ||
| 115 VAC Duplex Receptacle Panel Option | Yes - 10 Amps |
No | 115V duplex receptacle gives you 10 amps of auxiliary power. | ||
| Warranty | True Blue 3 Year 5yr coverage on Power Rectifiers (Standard) |
3 Year |
Service friendly, internal components are easy to access and cool, not excessively coated. | ||
