TRAILBLAZER 302 AIR PAK Accessories |
Stock# |  |
 | Protective Cover, Trailblazer 302 Air PakHeavy-duty, water resistant and mildew-resistant. Protects and maintains the finish of your twin-cylinder welder/generator. Note: Not for use with protective cage or running gear. | 300379 | $140.00 |  | Adapter Cord, Full KVAField NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240 V plug to common Millermatic and Spectrum 240 V plug. | 300517 | $64.00 |
|---|---|---|---|
 | AIR COOLER WITH SEPARATORCools and removes moisture from the air supply. Designed for use above 32 degrees F. Bypass in colder temperatures. | 300420 | $630.00 |
 | DESICCANT AIR DRY SYSTEM - 30A regenerating inline air dryer system that eliminates moisture in the air stream to prevent air tool freeze-ups in cold climates. Internal thermostat and heating elements insure good air quality in all climates. The system can be mounted remotely for tru | 300690 | $1999.00 |  | 25 ft Battery Charger / Jump Cable | 300422 | $175.00 |
 | TORCH,GOUGE ACA 7FTK-4000 ArcAir gouge torch. Order here sold separately or order in the secondary cable electrode side section on a 4/0 cable to get the gouge torch assembled directly to your secondary cable. | 233854 | $581.00 |
 | PROTECTIVE CAGE W/CABLE HOLDERS,TB 302 AIR PAKRugged cage with cable holders protects your investment. Can be used with trailer. | 300473 | $579.00 |  | Hwy-224 TrailerA 2650 lb (1202 kg) capacity highway trailer. Welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension. The Hwy-224 comes with jack stand, 2 in (50 mm) ball hitch, fenders and lights. Note: Trailer is shipped unassem | 043805 | $2005.00 |
| View Accessories for Hwy-224 Trailer | |||
| View Accessories for Hwy-224 Trailer | |||
| DUAL HITCH,2"BALL/3"LUNETTE EYE | 300831 | $225.00 | |
| RACK MTG CABLES TRAILER | 043826 | $202.00 | |
| FENDER KIT (224 TRAILER) | 300160 | $188.00 | |
| See More Information on Accessories for this Product » |  | HF-251D-1 High-Frequency Arc Starter and StabilizerPortable 115 Volt, 250 amp unit , 60% duty cycle unit adds high-frequency to the welding circuit to help start the arc when using the TIG process. (requires Secondary Contactor and RMLS-14 Switch). | 042388 | $1232.00 |
| View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer | |||
| View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer | |||
| ADAPTER CORD 14 PIN MACHINE 5 PIN CONTROL | 041947 | $158.00 | |
| SECONDARY CONTACTOR KIT, 115V | 041969 | $496.00 | |
| CONTACTOR KIT,230V | 041906 | $830.00 | |
| RCC-14 (FINGER TIP) | 151086 | $213.00 | |
| RCCS-14 (FINGER TIP) | 043688 | $226.00 | |
| RFCS-14,(FOOT CONTROL) | 043554 | $286.00 | |
| RHC-14 REMOTE HAND CONTROL W/CABLE 20 FT | 242211020 | $266.00 | |
| RMLS-14,(ROCKER SWITCH) | 129337 | $172.00 | |
| RMS-14 (MOMENTARY PUSHBUTTON) | 187208 | $167.00 | |
| RHC-14 REMOTE HAND CONTROL W/CABLE 100 FT | 242211100 | $431.00 | |
| CABLE,EXTENSION 24 VAC 14 PIN 8C 25 FT | 242208025 | $171.00 | |
| CABLE,EXTENSION 24 VAC 14 PIN 8C 50 FT | 242208050 | $256.00 | |
| CABLE,EXTENSION 24 VAC 14 PIN 8C 80 FT | 242208080 | $358.00 | |
| See More Information on Accessories for this Product » | |||
Electric Fuel Pump Kit | 195214 | $75.00 | |
FILTER/SEPARATOR KIT,COMPRESSORField. Air Compressor Tune-up kit includes oil filter, air filter and oil separator. | 235202 | $240.98 | |
TUNE-UP & FILTER KIT,KOHLER (CH750)Field. Kohler CH750 Tune-up kit includes spark plugs and engine filters. | 238743 | $61.57 |  | Spoolmatic® 30A Spool GunIdeal for aluminum welding jobs. 200 amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. For detailed information, see Spoolmatic literature, Index No. M/1.5 | 130831 | $1224.00 |
| View Accessories for Spoolmatic® 30A Spool Gun | |||
| View Accessories for Spoolmatic® 30A Spool Gun | |||
| WC-115A | 137546 | $856.00 | |
| WC-115A W/CONTACTOR KIT | 137546011 | $1271.00 | |
| KIT,CABLE COVER 30 FT GUN | 118678 | $197.00 | |
| PSA-2 | 141604 | $360.00 | |
| CANISTER,1 LB SPOOL | 132230 | $114.00 | |
| EXTENSION KIT,HOSE&CABLE 25 FT | 132228 | $527.00 | |
| EXTENSION KIT,HOSE&CABLE 50 FT | 132229 | $748.00 | |
| WC-24 CONTROL | 137549 | $326.00 | |
| TIP,FASTIP .312 OD .035 AND .030AL WIRES | 206186 | $1.44 | |
| TIP,FASTIP .312 OD .035 AND .030AL WIRES | 223016 | $1.47 | |
| TIP,FASTIP .312 OD .040 AND .035AL WIRES | 223017 | $1.47 | |
| TIP,FASTIP .312 OD .040 AND .035AL WIRES | 206187 | $1.44 | |
| TIP,FASTIP .312 OD .045 AND .040AL WIRES | 206188 | $1.44 | |
| TIP,FASTIP .312 OD .040 AND .045AL WIRES | 223018 | $1.47 | |
| TIP,FASTIP .312 OD .052, BULK | 206189B | $1.35 | |
| TIP,FASTIP .312 OD .052 AND 3/64AL WIRES | 206189 | $1.44 | |
| TIP,FASTIP .312 OD .052 AND 3/64AL WIRES | 223019 | $1.47 | |
| TIP,FASTIP .312 OD 1/16 WIRE | 206190 | $1.44 | |
| TIP,FASTIP .312 OD 1/16 AND .030AL WIRES | 223200 | $1.47 | |
| DIFFUSER,.281/.312 OD FASTIP 1/4 TIP RECESS | 210664 | $13.27 | |
| DIFFUSER,.281/.312 OD FASTIP 1/8 TIP RECESS | 206195 | $13.16 | |
| DIFFUSER,.281/.312 OD FASTIP FLUSH TIP | 206196 | $13.27 | |
| ROLL,DRIVE VK GROOVE .030-.035 WIRE | 183357 | $25.97 | |
| ROLL,DRIVE VK GROOVE .030-1/16 WIRE | 136135 | $29.04 | |
| ROLL,DRIVE VK GROOVE .047-.062 WIRE | 183358 | $28.65 | |
| INSULATOR,NOZZLE | 198856 | $2.75 | |
| LINER,PHOS BRONZE .030-1/16 WIRE | 212156 | $13.82 | |
| NOZZLE,COPPER 1/2 IN ORIFICE TAPERED | 199615 | $17.41 | |
| NOZZLE,COPPER 3/4 IN ORIFICE STRAIGHT | 199616 | $17.41 | |
| NOZZLE,COPPER 5/8 IN ORIFICE TAPERED | 198855 | $17.23 | |
| See More Information on Accessories for this Product » |  | WC-24 Weld ControlThe WC-24 easily mounts directly on the power source. It is designed for use with Miller CV power sources supplying 24 VAC and 14-pin receptacles. Includes a board-mounted potentiometer that can alter motor acceleration rate to optimize arc starting. | 137549 | $326.00 |
 | RHC-14 REMOTE HAND CONTROL W/CABLE 20 FTMiniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. | 242211020 | $266.00 |
| RHC-14 REMOTE HAND CONTROL W/CABLE 100 FTMiniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 100 ft (6 m) cord and 14-pin plug. | 242211100 | $431.00 |
 |
|||
* All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment.
