Miller Electric

Engine-Driven

Home » Products » Engine-Driven Welders/Generators » TRAILBLAZER 302 » Accessories »

TRAILBLAZER 302 Accessories

Stock# Manufacturer List Price US$   Ready to Buy?
TRAILBLAZER 302

Rear-Mounted Remote Oil Drain & Filter Kit (Kohler)

Oil can be drained from the rear of the machine.

300106$169.00 
TRAILBLAZER 302

Rear-Mounted Remote Oil Drain & Filter Kit (Subaru/Robin)

Oil can be changed from the rear of the machine.

300417$169.00 
TRAILBLAZER 302

Front/Chassis Truck-Mounted Remote Oil Drain & filter Kit (Kohler)

Oil can be changed from the front of the machine or below the truck, mounted on the chassis.

300236$199.00 
TRAILBLAZER 302

Front/Chassis Truck-Mntd Rmt Oil Drain & Filter Kit (Subaru/Robin)

Oil can be changed from the front of the machine or below the truck, mounted on the chassis.

300418$199.00 
TRAILBLAZER 302

Protective Cover, Bobcat/Trailblazer Gas

Heavy-duty, water resistant and mildew-resistant. Protects and maintains the finish of your twin-cylinder welder/generator. Note: Not for use with protective cage or running gear.

195333$120.00 
 

Protective Cover, Bobcat /Trailblazer Gas

Will cover Engine Drives with a protective cage and/or running gear. Heavy-duty, water resistant and mildew-resistant. Protects and maintains the finish of your welder/generator. NOTE: protective cage center supports cannot be used with cover.

195529$140.00 
TRAILBLAZER 302

All Purpose Running Gear

Recommended for all surfaces and applications and is easy to move around the jobsite. Includes two heavy-duty 15 in tires with innertubes, two 8 in swivel casters and a heavy-duty handle.

300396$399.00 
TRAILBLAZER 302

All-Purpose Running Gear with Protective Cage

Recommended for all surfaces and applications and is easy to move around the jobsite. Includes two heavy-duty 15 in tires with innertubes, two 8 in swivel casters and a heavy-duty handle. Rugged cage with cable holders protects your investment.

300428$609.00 
TRAILBLAZER 302

All-Purpose Running Gear with Never Flat Tires

Extended wheelbase, extra-heavy-duty front casters, and 1-inch diameter axles for increased ruggedness. Never Flat Tires never lose their tire pressure because they are foam-filled and are immune to tire punctures.

300477$559.00 
TRAILBLAZER 302

All Purpose Running Gear with Cage and Never Flat Tires

Extended wheelbase, extra-heavy-duty front casters, and 1-inch diameter axles for increased ruggedness. Cage for machine protection, and Never Flat Tires never lose their tire pressure because they are foam-filled and are immune to tire punctures.

300478$759.00 
 

RUNNING GEAR,ALL TERRAIN EZ

300572$409.00 
 

RUNNING GEAR,ALL TERRAIN EZ WITH PROTECTIVE CAGE

300573$609.00 
 

RUNNING GEAR,ALL TERRAIN EZ WITH NEVER FLAT TIRES

300574$689.00 
 

RUNNING GEAR,ALL TERRAIN EZ W/CAGE AND NEVER FLAT

300575$689.00 
 

Protective Cage with Cable Holders

Rugged cage with cable holders protects your investment of your twin-cylinder engine drive. Can be used with running gear, Gas Cylinder Mounting Assembly, LP Tank Mounting Assembly or with trailer.

195331$339.00 
TRAILBLAZER 302

LP Tank Mounting Assembly

Includes bracket and clamp to mount 33 and 43 lb tanks horizontally, and hose with fittings to converter. Designed for use with Flat-Terrain Running Gear, Protective Cage, or by itself. Note: Cannot be used with Gas Cylinder Mounting Assembly.

195329$329.00 
TRAILBLAZER 302

Gas Cylinder Mounting Assembly

Includes base tray with bottle bracket, vertical support rack and safety chain. Designed for use with Flat-Terrain Running Gear, Protective Cage, or by itself. Note: Cannot be used with LP Tank Mounting Assembly.

195330$269.00 
TRAILBLAZER 302

Hwy-1000 Trailer

A 1000 lb (454 kg) capacity highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension comes with jack stand, 2 in (50 m) ball hitch, fenders and lights. NOTE: Trailer is shipped unassembled.

195013$1349.00 
 View Accessories for Hwy-1000 Trailer   
 View Accessories for Hwy-1000 Trailer   
 CABLE TREE (HWY 1000)195023$199.00 +
 CABLE TREE (HWY 1000)195023$199.00 +
 HITCH,2-1/2 IN LUNNETTE EYE043824$133.00 +
 HITCH,2-1/2 IN LUNNETTE EYE043824$133.00 +
 See More Information on Accessories for this Product »   
TRAILBLAZER 302

Adapter Cord, Full KVA

Field NEMA 14-50P to NEMA 6-50R. Adapts engine drive 120/240 V plug to common Millermatic and Spectrum 240 V plug.

300517$59.00 
 

Spark Arrestor

Mandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other areas, check your state and local laws.

043579$51.00 
TRAILBLAZER 302

HF-251D-1 High-Frequency Arc Starter and Stabilizer

Portable 115 Volt, 250 amp unit , 60% duty cycle unit adds high-frequency to the welding circuit to help start the arc when using the TIG process. (requires Secondary Contactor and RMLS-14 Switch).

042388$1084.00 
 View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer   
 View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer   
 ADAPTER CORD 14 PIN MACHINE 5 PIN CONTROL041947$132.00 +
 SECONDARY CONTACTOR KIT, 115V041969$482.00 +
 CONTACTOR KIT 230V041906$647.00 +
 CABLE,EXTENSION 24 VAC 25 FT242208025$154.92 +
 CABLE,EXTENSION 24 VAC 50 FT242208050$232.09 +
 CABLE,EXTENSION 24 VAC 80 FT242208080$324.69 +
 See More Information on Accessories for this Product »   
TRAILBLAZER 302

Full KVA Plug Kit

240 VAC, 50 amp plug (NEMA 14-50P) to fit full KVA receptacle on Bobcats.

119172$55.16 
 

TUNE-UP & FILTER KIT,ROBIN (EH64/65)

199062$46.76 
 

TUNE-UP & FILTER KIT, KOHLER (CH23) OHV

Tune-up kit includes spark plugs (gas/LP models) and engine filters.

230015$45.33 
TRAILBLAZER 302

Spoolmatic® 30A Spool Gun

Ideal for aluminum welding jobs. 200 amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. For detailed information, see Spoolmatic literature, Index No. M/1.5

130831$1212.00 
 View Accessories for Spoolmatic® 30A Spool Gun   
 View Accessories for Spoolmatic® 30A Spool Gun   
 WC-115A137546$784.00 +
 WC-115A W/CONTACTOR KIT137546011$1164.00 +
 KIT,CABLE COVER 30 FT GUN118678$176.00 +
 CANISTER,1 LB SPOOL132230$105.00 +
 EXTENSION KIT,HOSE&CABLE 25 FT132228$483.00 +
 EXTENSION KIT,HOSE&CABLE 50 FT132229$685.00 +
 WC-24 CONTROL137549$298.00 +
 See More Information on Accessories for this Product »   
TRAILBLAZER 302

WC-24 Weld Control

The WC-24 easily mounts directly on the power source. It is designed for use with Miller CV power sources supplying 24 VAC and 14-pin receptacles. Includes a board-mounted potentiometer that can alter motor acceleration rate to optimize arc starting.

137549$298.00 
TRAILBLAZER 302

RHC-14 REMOTE HAND CONTROL W/CABLE 20 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug.

242211020$246.00 
TRAILBLAZER 302

RHC-14 REMOTE HAND CONTROL W/CABLE 100 FT

Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 100 ft (6 m) cord and 14-pin plug.

242211100$398.00 
       
When Sparks Fly Miller Had You Covered Genuine Select

* All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment.

Powerline Financing