TRAILBLAZER 275 DC Accessories |
Stock# |  |
 |
 | Rear-Mounted Remote Oil Drain & Filter Kit (Kohler)Oil can be drained from the rear of the machine. | 300106 | $169.00 |  |
| Rear-Mounted Remote Oil Drain & Filter Kit (Subaru/Robin)Oil can be changed from the rear of the machine. | 300417 | $169.00 | |
 | Front/Chassis Truck-Mounted Remote Oil Drain & filter Kit (Kohler)Oil can be changed from the front of the machine or below the truck, mounted on the chassis. | 300236 | $199.00 | |
| Front/Chassis Truck-Mntd Rmt Oil Drain & Filter Kit (Subaru/Robin)Oil can be changed from the front of the machine or below the truck, mounted on the chassis. | 300418 | $199.00 | |
 | Protective Cover (gas)Heavy-duty, water resistant and mildew-resistant with Flame graphics. Protects and maintains the finish of your twin-cylinder welder/generator. Note: Not for use with protective cage or running gear. | 195333 | $120.00 | |
 | Protective CoverWill cover Engine Drives with a Running Gear. Heavy-duty, water resistant and mildew-resistant. Protects and maintains the finish of your twin-cylinder welder/generator. | 195529 | $140.00 | |
 | All Purpose Running GearRecommended for all surfaces and applications and is easy to move around the jobsite. Includes two heavy-duty 15 in tires with innertubes, two 8 in swivel casters and a heavy-duty handle. | 300396 | $399.00 | |
 | All-Purpose Running Gear with Protective CageRecommended for all surfaces and applications and is easy to move around the jobsite. Includes two heavy-duty 15 in tires with innertubes, two 8 in swivel casters and a heavy-duty handle. Rugged cage with cable holders protects your investment. | 300428 | $609.00 | |
| All-Purpose Running Gear with Never Flat TiresExtended wheelbase, extra-heavy-duty front casters, and 1-inch diameter axles for increased ruggedness. Never Flat Tires never lose their tire pressure because they are foam-filled and are immune to tire punctures. | 300477 | $559.00 | |
| All Purpose Running Gear with Cage and Never Flat TiresExtended wheelbase, extra-heavy-duty front casters, and 1-inch diameter axles for increased ruggedness. Cage for machine protection, and Never Flat Tires never lose their tire pressure because they are foam-filled and are immune to tire punctures. | 300478 | $759.00 | |
 | All-Terrain Running Gear LXTwo heavy-duty 15 in and two 10 in pneumatic tires with innertubes and a rugged handle. | 300457 | $409.00 | |
 | All-Terrain Running Gear LX with Protective CageTwo heavy-duty 15 in and two 10 in pneumatic tires with innertubes and a rugged handle. | 300458 | $609.00 | |
|---|---|---|---|---|---|
RUNNING GEAR,ALL TERRAIN LX WITH NEVER FLAT TIRES | 300492 | $609.00 | | ||
RUNNING GEAR,ALL TERRAIN LX W/CAGE AND NEVER FLAT | 300493 | $809.00 | |  | Protective Cage with Cable HoldersRugged cage with cable holders protects your investment of your twin-cylinder engine drive. Can be used with running gear, Gas Cylinder Mounting Assembly, LP Tank Mounting Assembly or with trailer. | 195331 | $339.00 | |
 | LP Tank Mounting AssemblyIncludes bracket and clamp to mount 33 and 43 lb tanks horizontally, and hose with fittings to converter. Designed for use with Flat-Terrain Running Gear, Protective Cage, or by itself. Note: Cannot be used with Gas Cylinder Mounting Assembly. | 195329 | $329.00 | |
 | Gas Cylinder Mounting AssemblyIncludes base tray with bottle bracket, vertical support rack and safety chain. Designed for use with Flat-Terrain Running Gear, Protective Cage, or by itself. Note: Cannot be used with LP Tank Mounting Assembly. | 195330 | $269.00 | |
 | Hwy-1000 TrailerA 1000 lb (454 kg) capacity highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension comes with jack stand, 2 in (50 m) ball hitch, fenders and lights. NOTE: Trailer is shipped unassembled. | 195013 | $1349.00 | |
| View Accessories for Hwy-1000 Trailer | |||||
| View Accessories for Hwy-1000 Trailer | |||||
| CABLE TREE (HWY 1000) | 195023 | $199.00 | + | ||
| CABLE TREE (HWY 1000) | 195023 | $199.00 | + | ||
| HITCH,2-1/2 IN LUNNETTE EYE | 043824 | $133.00 | + | ||
| HITCH,2-1/2 IN LUNNETTE EYE | 043824 | $133.00 | + | ||
| See More Information on Accessories for this Product » |  | Full KVA Adapter Cord | 300158 | $99.00 | |
Spark ArrestorMandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other areas, check your state and local laws. | 043579 | $51.00 | |  | HF-251D-1 High-Frequency Arc Starter and StabilizerPortable 115 Volt, 250 amp unit , 60% duty cycle unit adds high-frequency to the welding circuit to help start the arc when using the TIG process. (requires Secondary Contactor and RMLS-14 Switch). | 042388 | $1084.00 | |
| View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer | |||||
| View Accessories for HF-251D-1 High-Frequency Arc Starter and Stabilizer | |||||
| ADAPTER CORD 14 PIN MACHINE 5 PIN CONTROL | 041947 | $132.00 | + | ||
| SECONDARY CONTACTOR KIT, 115V | 041969 | $482.00 | + | ||
| CONTACTOR KIT 230V | 041906 | $647.00 | + | ||
| CONNECTION/EXTENSION CORD 25 FT 24VAC | 122973 | $183.00 | + | ||
| CONNECTION/EXTENSION CORD 50 FT 24VAC | 122974 | $233.00 | + | ||
| CONNECTION/EXTENSION CORD 75 FT 24VAC | 122975 | $283.00 | + | ||
| See More Information on Accessories for this Product » |  | Full KVA Plug Kit240 VAC, 50 amp plug (NEMA 14-50P) to fit full KVA receptacle on Bobcats. | 119172 | $55.16 | |
 | Suitcase™ 12 RC WirefeederCompact, portable, constant-speed wire feeder with remote voltage control. For .030 - 5/64in (0.8-2mm) hard and flux coreded wires. Holds up to 12 in, 44 lb spool of wire. (See Lit. index No. M/6.5) | 194940 | $1829.00 | |
| View Accessories for Suitcase™ 12 RC Wirefeeder | |||||
| View Accessories for Suitcase™ 12 RC Wirefeeder | |||||
| Q300 AMP GUN, 15FT .052 | Q3015AE8HM | $440.00 | + | ||
| CONNECTION/EXTENSION CORD 25 FT 24VAC | 122973 | $183.00 | + | ||
| CONNECTION/EXTENSION CORD 50 FT 24VAC | 122974 | $233.00 | + | ||
| CONNECTION/EXTENSION CORD 75 FT 24VAC | 122975 | $283.00 | + | ||
| KIT,METERS FOR SUITCASE 12RC | 195169 | $521.00 | + | ||
| KIT,METERS FOR SUITCASE 8RC | 195165 | $474.00 | + | ||
| PSA-2 | 141604 | $320.00 | + | ||
| FILTER,IN-LINE SHIELDING GAS | 195189 | $33.00 | + | ||
| KIT,DRIVE ROLL .045 V-GR 2 ROLL | 079596 | $32.63 | + | ||
| KIT,DRIVE ROLL .047 U-GR 2 ROLL | 079599 | $37.24 | + | ||
| KIT,DRIVE ROLL .023 V-GR 2 ROLL | 087131 | $33.07 | + | ||
| KIT,DRIVE ROLL .030 V-GR 2 ROLL | 079594 | $33.08 | + | ||
| KIT,DRIVE ROLL .035 VK-GR 2 ROLL | 079606 | $54.33 | + | ||
| KIT,DRIVE ROLL .035 V-GR 2 ROLL | 079595 | $32.63 | + | ||
| KIT,DRIVE ROLL .045 VK-GR 2 ROLL | 079607 | $53.54 | + | ||
| KIT,DRIVE ROLL .052 VK-GR 2 ROLL | 079608 | $54.33 | + | ||
| KIT,DRIVE ROLL 1/16 U-GR 2 ROLL | 079601 | $37.98 | + | ||
| KIT,DRIVE ROLL 1/16 VK-GR 2 ROLL | 079609 | $54.33 | + | ||
| KIT,DRIVE ROLL 5/64 VK-GR 2 ROLL | 079610 | $54.33 | + | ||
| See More Information on Accessories for this Product » |  | Spoolmatic® 30A Spool GunIdeal for aluminum welding jobs. 200 amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. For detailed information, see Spoolmatic literature, Index No. M/1.5 | 130831 | $1212.00 | |
| View Accessories for Spoolmatic® 30A Spool Gun | |||||
| View Accessories for Spoolmatic® 30A Spool Gun | |||||
| WC-115A | 137546 | $784.00 | + | ||
| WC-115A W/CONTACTOR KIT | 137546011 | $1164.00 | + | ||
| CABLE COVER, 30 FT | 118678 | $176.00 | + | ||
| CANISTER,1 LB SPOOL | 132230 | $105.00 | + | ||
| EXTENSION KIT,HOSE&CABLE 25 FT | 132228 | $483.00 | + | ||
| EXTENSION KIT,HOSE&CABLE 50 FT | 132229 | $685.00 | + | ||
| WC-24 CONTROL | 137549 | $298.00 | + | ||
| See More Information on Accessories for this Product » |  | WC-24 Weld ControlThe WC-24 easily mounts directly on the power source. It is designed for use with Miller CV power sources supplying 24 VAC and 14-pin receptacles. Includes a board-mounted potentiometer that can alter motor acceleration rate to optimize arc starting. | 137549 | $298.00 | |
 | RHC-14 Remote Hand Control (14-pin plug)Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. | 129340 | $246.00 | |
| View Accessories for RHC-14 Remote Hand Control (14-pin plug) | |||||
| View Accessories for RHC-14 Remote Hand Control (14-pin plug) | |||||
| CONNECTION/EXTENSION CORD 25 FT 24VAC | 122973 | $183.00 | + | ||
| CONNECTION/EXTENSION CORD 50 FT 24VAC | 122974 | $233.00 | + | ||
| CONNECTION/EXTENSION CORD 75 FT 24VAC | 122975 | $283.00 | + | ||
| See More Information on Accessories for this Product » | |||||
 |
 |
||||
* All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment.
