Miller Electric

Spoolmate 100 Series

• Direct Connect cable allows for easy change over and set-up on aluminum
• Recessed contact tip for easier welding and prevention of burn back issues
• Dual V-knurled drive rolls for consistent feeding.
  Adjustable pressure lever for easy unloading and loading of wire
• Adjustable drive roll tension for feeding different types of wire
• Heavy-duty cast-aluminum gearbox and drive motor.
  12 ft. cable with heavy-duty strain relief to protect against kinking

Millermatic 140 with Auto-Set™

• Auto-Set™ is a breakthrough control that automatically sets your welder to the proper perameters.
• Smooth Start™ patent-pending technology provides a smooth, spatter-free start.
• 115 Volt unit
• Used for body hanging, tacking, small bracket or tube welding, great at-track welder, and will run off of a 3500-watt generator
• Great for thicknesses of .125" and less
• Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel

Millermatic 180 with Auto-Set™

• Auto-Set™ is a breakthrough control that automatically sets your welder to the proper perameters.
• More output! Welds 24 gauge up to 5/16" mild steel in a single pass.
• Smooth Start™ patent-pending technology provides a smooth, spatter-free start.
• 230 Volt unit
• Used for Light Fabrication, Auto Body, Farm/Ranch, Hobby
• Welds 24 gauge - 1/4 in. (0.8-6.4mm) mild steel

Millermatic Passport Plus

• 115 volt or 230 volt single phase input
• Quick change cord adapters for different receptacles
• Light weight, heavy duty plastic case totally portable
• Onboard gas supply eliminates external bottle when using for mobile repairs
• Excellent inverter arc and 180 amps of power suit this unit for both shop and mobile work
• Can be used with external gas supply
• For budget minded racers that want enough power at the shop and be able to take to the track
• Easily runs off a 5000 watt generator
• Great for body work up to light chassis fabrication
• For steel 3/8 and less

Millermatic DVI₂

• 115 Volt or 230 Volt single phase input
• Quick change cord adapters for different receptacles
• Heavy-duty drive roll system
• Ideal for shops that don't have 230 volt power available everywhere
• When plugged for 230 input, this unit easily handles chassis building or repair
• Also good for body work, suspension, and trailer building
• Adapts easily to spoolgun for Aluminum MIG welding
• Welds materials 3/8 and less

Millermatic 212

• Seven taps provide wider welding range of 30-210 amps with superior performance throughout its operating range.
• Add optional Spoolmate™ 3035 spool gun. Easy to install with new, direct hook up. With Miller's exclusive Gun on Demand™ feature, simply pull the trigger for either gun and you're ready to weld. No wasted time installing modules and using toggle switches.
• 208/230 Volt unit
• Used for Light Fabrication, Garage/Body shops, Farm & Ranch, vocational/technical schools.
• Welds material from 22 gauge to 3/8 in. thick in a single pass

Millermatic 252

• Highest output in its class! 250 Amps, 28 volts, 40% duty cycle.
• Integrated digital timers menu with pre-setable timing controls.
• Patented Auto-Gun Detect recalls voltage, wire feed speed and timers for active gun
• Direct connect for any Miller push/pull or spool gun - no extra module required.
• 208/230; 230/460/575 Volt units
• Used for Metal Fabrication, Maintenance/Repair, Farm and Ranch, Light Industrial Applications
• Welds material from 22 gauge to 1/2 in. thick in a single pass.

Millermatic 350/350P

• 200/230/460 single or three phase
• 350P has pulse mig ability
• One of the best pulse units on the market
• Heavy duty 4 drive roll system
• Can be used as a push/pull system or spoolgun when doing aluminum
• Used for chassis or trailer production where high duty cycles are needed
• Also used for aluminum pulse mig on spoilers, tubs, seats or aluminum trailers
• For material 1/2" and less