Miller Electric

Miller News

Home » Miller News » What do you need to start welding Aluminum?

What do you need to start welding Aluminum?

If you already own a MIG welder, you may be wondering what it takes to start using that machine to weld some aluminum. Miller® has continued to provide spool gun solutions that are simple and directly connect to your welder for welding aluminum. This makes changing to aluminum faster and less expensive than you may think.

First, you’re going to need a spool gun. Why another gun? Well, the column strength or the amount you can push on Aluminum wire without buckling is only about one-third the amount that mild steel wire can withstand. This causes feeding issues if you try to push the aluminum through a standard MIG torch. Spool guns only push the wire a short distance in a straight line from the drive rolls, so feeding isn’t compromised. The Spoolmate™ 100 Series spool gun is a direct connect option for the Millermatic® 140 Auto-Set™, 180 Auto-Set and 211 Auto-Set with MVP MIG welders, and the Multimatic™ 200 MIG/TIG/Stick welder. The Spoolmate™ 200 Series spool gun is the entry level spool gun for the Millermatic 212 Auto-Set and Millermatic 252 MIG welders. For the more industrial user, the Spoolmatic® 15A or 30A guns are a better fit on those machines.

The next thing you’re going to need is different shielding gas. Aluminum requires 100 percent argon shielding gas. Any shielding gas containing oxygen will cause an unstable arc with impurities when welding Aluminum.

Finally, you will need to be sure you have good MIG welding technique.  Aluminum requires you to push the torch to ensure effective shielding gas coverage. Everything else in your technique is the same as welding mild steel, but at a faster pace. Due to the high thermal properties of Aluminum, more heat is required to start a molten puddle. This increased amount of heat then requires a higher travel speed once the puddle is established to prevent burn through. Aluminum MIG welding doesn’t have to be difficult with the appropriate equipment and some practice.

Tags: , , , , ,

Return to main Viewpoints page

Comments are closed.