Miller Electric

Miller News

Home » Miller News

Posts Tagged ‘welding’

Stainless Steel Filler Metal and Shielding Gas Selection for Automotive Projects

Tuesday, April 16th, 2013

Ready to tackle that stainless steel project out in the garage? Miller Marketing Manager John Swartz discusses important factors for stainless steel filler metal and shielding gas selection in the video below. Also, follow the link below for a handy stainless steel filler metal selection cheat sheet.

Stainless Steel Filler Metal Selection Chart

An Ode to Fabtech

Wednesday, November 14th, 2012

We’ll be bringing more stuff live to you yet today – but in honor of the last day of Fabtech, here is an ode – by Welderman:

Educational Opportunities Today (11/13) at FABTECH 2012

Tuesday, November 13th, 2012

There are a number of Miller/ITW-related presentations taking place today as part of Fabtech 2012. You can check them out here:

Educational Annual Program: Tuesday, 11/13
Session 10E 4:00 pm Room N242
Weld Fume Mitigation: Evaluating Environmental, Source Capture and PPE Solutions and Choosing the Best for Your Application
Presenter: Al Hilbert, Miller

Health & Safety in the Welding Environment Program: Tuesday, 11/13
Session W27
9:35-10:10 am Room N253
Source Capture and PPE Solutions for Weld Fume Management
Presenters: Eric Summers and Al Hilbert, Miller

1:20-1:55pm Room N253
Considerations for Reducing Fume Generation in the GMAW Process: Filler Metals, Welding Variables and More
Presenters: Aaron Bischoff, Hobart Brothers and Al Hilbert, Miller

The AWS/SkillsUSA U.S. Weld Invitationals at FABTECH 2012

Tuesday, November 13th, 2012

Good morning and welcome to Day 2 of FABTECH 2012. The welding action continues today at the AWS/SkillsUSA U.S. Open Weld Invitationals. We took some time yesterday to get an overview of the competition, as well as introduce each of the six Americans vying for the three spots in the finals.

Meet the Six American Competitors 

Competition Introduction from Nick Peterson

The competition put out the following news release yesterday, detailing the event and announcing that the finals to determine who goes on to represent the U.S. at WorldSkills will take place at Daytona Speedweek in 2013:

Las Vegas, Nevada, USA – November 12, 2012For six young welders, the AWS/SkillsUSA U.S. Invitational Weld Trials is just like the U.S. Olympic team tryouts, but without the television coverage and million-dollar spokesperson contracts. It does, however, come with a realistic expectation that they can obtain a relevant job that is in high demand and significantly contributes to our quality of life in America.

The AWS/SkillsUSA U.S. Invitational Weld Trials at the 2012 FABTECH Exposition in Las Vegas, Nevada from November 12th to the 14th will host 11 competitors from 5 countries. Convention attendees will be able to witness firsthand the competition spread over four days of welding using multiple welding processes. Some of the welding requirements are so precise that the welds will require x-ray reviews and hydrostatic pressure tests to 1000 pounds per square inch in order to verify the integrity and quality of the welds.

Competing will be six national SkillsUSA welder finalists that have bested 1000’s of their peers in a near yearlong battle across America. Alongside them will be 5 international competitors representing Australia, Canada, The United Kingdom (2), and Russia. Wednesday evening, November 14th at a private reception, the top three USA competitors will be named along with Gold, Silver, and Bronze Medals for the top three overall finishers.

The top three USA competitors will advance to a “Tune Up” at the AIDT training Center in Mobile Alabama, a division of the Alabama Department of Commerce that encourages economic development through job-specific training. Past TeamUSA Welding Medalists will train all three to give TeamUSA the best chances of earning a Medal in Germany this summer.

Tony Hopper, director of the Mobile AIDT Training Center, is excited to host these top welders for their training; “While these competitors are here, we will be hosting a career expo for local schools and employers to promote the need for skilled welders and all skilled careers along the Gulf Coast. We helped with the tune up for the 2011 WorldSkills Competition and the USA brought home a Bronze Medal for welding. This time, we hope it will be a Gold, but medal or not, as long as these competitors give their best that is all we expect.”

These top three competitors will then compete for the final TeamUSA position during the 2013 Daytona 500 Speedweek.

February 23rd, the day before the Daytona 500, the TeamUSA welder will be announced. That winner will not only represent the United States at the 42nd WorldSkills Competition in Leipzig, Germany July 2-7 2013 (worldskills.org), but will also receive a $40,000.00 scholarship from the American Welding Society Foundation.

FABTECH 2012 Is Officially Here!

Monday, November 12th, 2012

Good morning welding, manufacturing and fabricating aficionados:

FABTECH 2012 is about to kick off and you can join us here at the Las Vegas Convention Center through Wednesday, November 14 in booth N5213 for all of the latest in welding products, accessories and safety solutions.

If you are at home, and cannot join us for the show, follow along the action all week at MillerWelds.com/FABTECH! 

A few highlights today:

1. We’ve got a bunch of new products in the booth, from industrial welding systems to engine-driven welder generators to robotic solutions to new welding helmet designs! Come down and see us!

2. The U.S. Open Welding Invitationals, part of the SkillsUSA semifinal process to determine who will move on to compete for a spot at WorldSkills, is taking place here during the week. Events officially kick off this afternoon and Miller is a very proud sponsor of this event.

3. Hobart Brothers’ Joe Bundy takes part in a panel discussion this afternoon at 2:00 PM in room N238 on Stress Rupture Evaluation of Steel Welding Consumables. The presentation is taking place in conjunction with Xiao Chai (University of Wisconsin-Madison) and S. Babu (Ohio State University.

Stay tuned throughout the week for more exciting news from the show!

U.S. and International Competitors Get Instructions on Day 1 of the U.S. Open Weld Invitationals at FABTECH 2012

Miller Supports I Make America Campaign with Video

Tuesday, October 23rd, 2012

Miller is proud to support the Association of Equipment Manufacturers I Make America Campaign. We’ve been selected by IMA to share the Miller story through A Day in American Life video. Check out our video and find out more about this important campaign.

 

Denver area Boy Scouts Earn Badges at IIW

Wednesday, September 5th, 2012

Inside the Colorado Convention Center in Denver this July, the brightest minds of welding gathered for the International Institute of Welding conference. Right across the street from the conference, at the Miller Road Show Truck, wide eyed and eager boy scouts were learning to weld and earning the new Boy Scouts of America welding merit badge thanks to efforts from Miller, AWS and volunteer instructors.

In this month’s Instructor newsletter, find out why forty boys earning the welding badge is an important step for the future of welding.

 

Knowledge is Power: Weld Data Monitoring

Tuesday, July 24th, 2012

Nick Peterson, a welding engineer and curriculum developer with Miller, contributes a quarterly column to Fabricating and Metalworking magazine. In the most recent column, Nick discusses weld data monitoring and the benefits it provides manufacturing and fabrication applications, including improved quality, productivity, cost analysis, consumable savings and training.

Read the whole story by clicking here!

Weld data monitoring gives manufacturers and fabricators greater insights into the day-to-day activities in the weld cell.

Vote for the Top Three Miller Welding Heroes Today.

Thursday, July 19th, 2012

Our “Nominate a Welding Hero” promotion is down to the top ten.

It’s your job to pick the top three and make your vote count. You can read our press release or go directly to the voting page!

Voting began July 16th and will end at 5:00 pm c.s.t. on July 31st. The final top three winners will be announced on August 13th.

Miller Launches “The Lambeau Episodes”

Wednesday, July 18th, 2012

As part of its distinction as the “Official Welding Equipment Provider of the Lambeau Field Expansion”, Miller and Hobart Brothers have launched “The Lambeau Episodes” – a series of Web videos detailing the welding work on the project. Check ‘em out and let us know what you think!

Series Trailer

Episode 1: Project Overview

Episode 2: Conversion to Flux Cored Welding