Array ( ) Miller - Welding Projects - Idea Gallery - pivot line wheel track filler
Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » We Build » pivot line wheel track filler
Submit Your Project

Find and share welding projects for home or work.

pivot line wheel track filler

by e. tatro
  • pivot line wheel track filler
    View Larger
  • Project Description

    This project was designed for a rancher to fill in pivot line tracks with gravel. The tracks are about 18" deep and will be filled with gravel. The modification to the box scraper has a 12" gap at center to allow filling of track

    Tools Used

    Trailblazer 301G, dewalt 9" grinder, victor journeyman torch, E6011 and E7018 rod, level, square, drill bits up to 11/16. 44"x25" 1/2" steel plate, 34" 2"x1"x1/4" angle iron, 18"x 1 1/2" plate 3

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.