Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Trailer

Welding Projects

Idea Gallery

Submit Your Project

Trailer

by J. Laplante Email J. Laplante

Project Description

the idea was to build a trailer 5`x 8` for four wheels. it is mostly made ​​of iron angle 2 "x 2" x 3/16. it `s the first big project that I have done with my thunderbolt xl 225 ac. I like this welding machine becaufe it is simple and economical. I like the "old school" feeling of this kind of welding.

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

Nice trailer. Personally for esthetics, I would cut off the bottom of the eyelet screws and weld them flush (thus, no extra threaded stud hanging down)

Mike • Saturday, April 13, 2013 @ 1:20 PM

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.