Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Welding Table

Welding Projects

Idea Gallery

Submit Your Project

Welding Table

by S. Bharrath

Project Description

2 x 4 welding table. 3/8 Steel Sheet for Chop Saw. 90 degree frame on top left for easy corner welds using clamps. Other bars and plates for convenient clampping. Small vise to support cut off pieces. Helmet Hanger and rod holder on left and electrode holder on right. Middle shelf made from Z purling for wire brush,chipping hammer etc. Two wheels on right and handle on left for moving around shop wheelbarrow style. Easy location set using opposing beam base on legs without locking wheels.

Tools Used

Arc Welder, Chop Saw , Angle Grinder, Drill

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

LIKE IT!!! Good job. Gives me ideas for when I eventually build my own.

Leon Wolfwalker • Sunday, March 17, 2013 @ 10:50 PM

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.