Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Slip Roller

Welding Projects

Idea Gallery

Submit Your Project

Slip Roller

by P. Duhamel Email P. Duhamel

Project Description

1 meter long capacity manual slip roller. Possibility to install electic motor. The roller have also 3 different radius groves for round stock. Also possibility to install dies on the shaft extremity for rolling other material. The main roller have 10mm wall thickness (they wont bend). Roller turn by a local suppier in Danang City. Plate model pre cut on my CNC plasma table and then flame cut by local supppier.

Build Process

I use 20 mm plates for main support. 5 mm plate for base. I use flange pillow block 30 mm for bearings.

Tools Used

Dynasty 200 DX, AGP magnetic drill, annular cutter, bench lathe, milling.

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

Nice post. I learn something far more challenging on distinctive blogs everyday. It will at all times be stimulating to read content from other writers and practice just a little some thing from their store. I'd prefer to make use of some using the conten

diulseNella • Friday, May 3, 2013 @ 12:11 AM

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.