Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Driveway Leveler

Welding Projects

Idea Gallery

Submit Your Project

Driveway Leveler

by D. Sullivan Email D. Sullivan

Project Description

This goes behind my cart or atv to level the gravel in the driveway

Build Process

The blade is from an old road grader. I cut it and welded it back at a 90deg and the channel at the back levels the gravel out. The design is kinda based on the ones used at tractor pulls.

Tools Used

MM251,grinder, torch, used grader blade, 4" channel, 1/2" rod, tires, 3/8 x 2 FB

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.