Lumber Rack
by Z. Glozman Email Z. Glozman
Project Description
Safety is the primary concern on any project. Always use
tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to
your Owner's Manual for complete safety precautions and
procedures.
Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.
Add Your Comment
You don't really need a lot for this I used 2 by 2 sqare tubing for the buttom and the uprights. My shelfs were 20 inches and the button peace was like 50. The diagonals were 1" solid bad. If you have any questions contact me.
Zglozman@gmail.com • Saturday, February 16, 2013 @ 9:18 AMNice job. Do you have any plans for sale? thanks
Tom • Tuesday, January 1, 2013 @ 9:57 AMI would like to build this project,could you please send me the material list , blue prints or construction steps.Thanks
craig lemmer • Tuesday, December 4, 2012 @ 8:46 PM