Custom Chopper modified 2007 softail frame I raked 44 degrees, moved oil tank to the down tubes covered in webs along with a webbed front headlight. Built the electronics compartment to house a custom made (by me) A123 dry 16 cell battery with a thunder-heart ignition inside, of course webbed the outside of the electronics compartment. Made the rear fender out of a 10 gauge fender blank, designed and built the fender strut in a web like fashion running almost the entire length of the fender. Gas tank was modified with a manual gas site gauge and hidden mounting system, with some modifications on the tunnel. Designed and made an upswept exhaust which I had covered in a heat resistant ceramic coating then also wrapped. Seat was custom made with alligator and black lizard skin. Springer front end I had made by a custom front end shop to my specs.
Miller Maxstar 150 STH
Miller 375 X-TREME
Welded with TIG & MIG cutting was mostly done with a plasma cutter.
Miller Millermatic 211
Safety is the primary concern on any project. Always use
tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to
your Owner's Manual for complete safety precautions and
Miller provides the information in the "Welding Projects" section of this site for your information
only. You are entirely responsible for your use of the information, your equipment, and the items you
build. You are responsible for any injury to yourself or others and for any property damage. The
information represents the opinions of individual welders, and does not necessarily reflect the
opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly
disclaims any claims related to any content. For further information, see our