Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Suspended BBQ

Welding Projects

Idea Gallery

Submit Your Project

Suspended BBQ

by D. Tchacos Email D. Tchacos

Project Description

Its a water rivetet tank off an old 1800 diesel engine that I cut out the damaged area and replaced it with a window cover on hinges and installed a three level adjustable steel support plate that is installed on the electric motor

Build Process

It took a few months due to the time factor but otherwise should not take more than a week

Tools Used

I used my miller big blue to weld the cover, hinges and the adjustable plates, the outside handle nd the electric motor on the outside of the tank also lifted the whole tank with a forklift and welded on the sides 2 pad eyes that were attached to 2 old ship chains and eventually welded onto the wall beams to hold the tank in the air

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.