Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Welding Table

Welding Projects

Idea Gallery

Submit Your Project

Welding Table

by J. Ort

Project Description

A welding table is a good choice for a first project since it will provide the foundation for many of your future welding projects. The table shown here is 4’ x ‘6’ and 38” high. We built it strong enough to hold an engine block (rated up to 1,000 lbs) and big enough to still have room to work. You may choose to downsize a bit. The tabletop overhangs the frame by 3” on 3 sides to allow room for clamping. On the grate side the tabletop should be flush with the frame to allow you to get closer to the work when you’re cutting. If you choose to modify the table dimensions, keep those considerations in mind and sketch things out prior to starting.

Add Your Comment

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.