Miller Electric

Welding Projects

Home » Industries & Interests » Welding Projects » Idea Gallery » Warrior Art

Welding Projects

Idea Gallery

Go To "Metal Art" Gallery

Warrior Art

by G. Gunsten

This was a sculpture that I made in about two hours, it was as if it fell together on its own. The name came after the build because I really had no clue as to how it would look when I was done. I was completely satisfied with the end result and it has become my favorite piece. This sculpture is unique because its pieces are made from metal I found and hauled down a huge hill in my backpack. I used my miller 110 volt MIG, with an argon shield to weld the sculpture. Now being the proud owner of a miller dynasty 200dx and XMT 304, I wish I had those when I did this project. This sculpture represents strength and serves as a protector from all that causes harm.
Average Rating [of 353]
*
*
*
o
o
Rate This Project
o o o o o
Next Project

Comments [0]

- Add Your Comment [255 Character Maximum]

Name: Add Your Comment:
E-Mail Address:
Remember Me
 

WARNING Safety is the primary concern on any project. Always use tools and equipment in accordance with the manufacturer's instructions. For Miller products, refer to your Owner's Manual for complete safety precautions and procedures.

Miller provides the information in the "Welding Projects" section of this site for your information only. You are entirely responsible for your use of the information, your equipment, and the items you build. You are responsible for any injury to yourself or others and for any property damage. The information represents the opinions of individual welders, and does not necessarily reflect the opinions and views of Miller. The projects have not been engineered by Miller. Miller expressly disclaims any claims related to any content. For further information, see our Terms of Use.