Miller Electric

Spoolmate 100 Series

• Direct Connect cable allows for easy change over and set-up on aluminum
• Recessed contact tip for easier welding and prevention of burn back issues
• Dual V-knurled drive rolls for consistent feeding.
  Adjustable pressure lever for easy unloading and loading of wire
• Adjustable drive roll tension for feeding different types of wire
• Heavy-duty cast-aluminum gearbox and drive motor.
  12 ft. cable with heavy-duty strain relief to protect against kinking

Millermatic 140 with Auto-Set

• Auto-Set™ is a breakthrough control that automatically sets your welder to the proper perameters.
• Smooth Start™ patent-pending technology provides a smooth, spatter-free start.
• 115 Volt unit
• Used for body hanging, tacking, small bracket or tube welding, great at-track welder, and will run off of a 3500-watt generator
• Great for thicknesses of .125" and less
• Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel

Spoolmatic 15A

Spoolmatic 30A

• Superior industrial spoolgun for Millermatic 251, Vintage, XMT series, Regency, and Trailblazer engine drives.
• .023-1/16" wire capacity
• 15ft or 30ft cables
• Use for welding spoilers, aluminum seats, trailer building or repair, at trackrepair with Trailblazer engine drive.

Millermatic 180

• More output! Welds 24 gauge up to 5/16" mild steel in a single pass.
• Smooth Start™ patent-pending technology provides a smooth, spatter-free start.
• 230 Volt unit
• Used for Light Fabrication, Auto Body, Farm/Ranch, Hobby
• Welds 24 gauge - 1/4 in. (0.8-6.4mm) mild steel

22A & 24A

• Used with XMT series, Regency, CP series, Deltaweld series and trailblazer.
• Great for chassis building where industrial duty cycles are needed.
• 8RC & 12RC designed for portability and durability. Easily connects to Trailblazer engine drives for on location welding.
• .023-5/64" wire capacity

Suitcase 8RC-12RC

• Used with XMT series, Regency, CP series, Deltaweld series and trailblazer.
• Great for chassis building where industrial duty cycles are needed.
• 8RC & 12RC designed for portability and durability. Easily connects to Trailblazer engine drives for on location welding.
• .023-5/64" wire capacity

Spoolmate 3035

Spoolmate 3545

• Great addition to Millermatic 135, 175, 185 or 210
• Works well with 14 guage to 3/16 material
• Used for welding spoilers, aluminum seats, at track repair with steel or aluminum wire.
• Can be used with aluminum, steel and stainless steel wire
• 20 ft cables allow welding at greater distances
• Direct hook up to MM210, no adapters needed.
• SGA 100 adapter #043856 adapts spoolguns to MM135, 175 and competitive equipment.