Miller Electric

Farm & Ranch

Home » Industries & Interests » Farm & Ranch » Most Popular Products » Plasma

Farm & Ranch

Most Popular Products

Plasma Cutting

  • Quickly cuts metal
  • Cuts steel, stainless, aluminum and more
  • Precise, clean cuts — no warping, distortion, or paint damage and leaves a straight edge
Spectrum 375 / Skill Level 2
Spectrum 375 		Spectrum 375 X-TREME / Skill Level 2
Spectrum 375 X-TREME with X-CASE 		Spectrum 625 / Skill Level 2
Spectrum 625 		Spectrum 2050 / Skill Level 2
Spectrum 2050
Input Voltage 115 or 230V 115 or 230V 230V 208 - 575 volts
(1 or 3 phase power)
Input Amp Circuit Requirement (115V) 20A breaker min;
30A recommended

(230V) 15A breaker min 		(115V) 20A breaker min;
30A recommended

(230V) 15A breaker min 		(230V) 35A breaker min
individual branch circuit 		(230V) 40A breaker min
individual branch circuit
Air Compressor Requirements 4.5 SCFM @ 90-120 PSI 4.5 SCFM @ 90-120 PSI 6 SCFM @ 90-120 PSI 6 SCFM @ 90-120 PSI
Weight 55 lbs 18 lbs 60 lbs 86 lbs
Rated Output 27 Amps 27 Amps 40 Amps 55 Amps
Mild Steel Cutting Comparison (Thickness vs Speed in Inches per Minute)
16ga @150+ IPM
1/8" @65 IPM
3/8" @10 IPM
16ga @150+ IPM
1/8" @65 IPM
3/8" @10 IPM
16ga @200+ IPM
1/8" @100+ IPM
3/8" @25 IPM
16ga @300+ IPM
1/8" @150+ IPM
3/8" @37 IPM
Piercing Thickness
(non-edge start)		 3/16" 3/16" 1/4" 7/16"
Product Highlights
  • Affordable plasma cutter for general automotive applications.
  • Capable of plugging into either 115 or 230V input power.
  • Change to 230V input with manual switch and user supplied plug.
  • For users who want X-TREME portability — a machine the size of a lunchbox.
  • X-TREME versatility with Auto-Line circuitry that automatically adjusts to either 115 or 230V input.
  • Exclusive Multi-Voltage Plug (MVP™).
  • For users who want to cut faster and need more cutting power (up to 1/2" mild steel at 10 IPM).
  • Plasma arc gouging capabilities.
  • Includes standard 230V plug.
  • For users who want to cut faster and need more cutting power (up to 7/8" mild steel at 10 IPM).
  • Plasma arc gouging capabilities.
  • Maintains rated cut thickness when powered by a generator of 10 kW or more.
Using Generator Power See Engine-Driven Power Chart [PDF]
  See All Plasma Products »

To get a product recommendation, use our SmartSelector™ »