High Res Media Images
- PipePro Welding System
- ProHeat 35
- Millermatic 350/Xr-Aluma-Pro
- Millermatic Passport Plus
- Spoolmate 100 Series
- Maxstar 150
- Maxstar 200
Products
Media Contact
Insight Marketing
262-240-9790
John Dymale: johnd@imipr.com
Ron Piskula: ronp@imipr.com
Miller To Present Latest in Arc Welding Technology at the 2008 FABTECH International & AWS Welding Show
APPLETON, Wis., July 21, 2008—Miller Electric Mfg. Co. will present the latest in arc welding technology in booth #13077 at the FABTECH International & AWS Welding Show, October 6 - 8, 2008, at the Las Vegas Convention Center. Miller will be showcasing its PipePro™ Welding System, ProHeat 35™ Induction Heating System, Millermatic® 350/XR-Aluma-Pro™ pulsed MIG aluminum welding system, as well as portable welding solutions, such as the Millermatic® Passport® Plus with Spoolmate™ 100 Series spool gun, and Maxstar® 150 and Maxstar® 200 DC TIG/Stick welding solutions.
 |
- The Miller PipePro™ Welding System is a one-package pipe welding solution for both field and shop fabrication. The PipePro features Miller’s RMD™ (Regulated Metal Deposition) process, a precisely controlled short-circuit transfer technology that provides welders with an easy to use welding process with excellent puddle control for the root pass. The PipePro also features ProPulse™, an easy-to-use advanced pulsed MIG process with precise control of the arc and puddle even in narrow joints.
 |
- The Miller ProHeat 35™ Induction Heating System induces heat electromagnetically to bring a
part to temperature in a fraction of the time of flame or resistance-heating methods. With the ProHeat heating system, one or two joints can be rapidly and uniformly heated for preheat or stress relief with minimal setup and instruction time.
 |
- The Millermatic® 350/XR-Aluma-Pro™ system combines the Millermatic® 350P all-in-one MIG/Pulsed MIG welder with the XR™-Aluma-Pro™ push-pull gun to provide superior 4000- and 5000-series aluminum feeding and welding performance. The Millermatic 350P includes new pulsed MIG programming to meet the specific welding requirements of 4000- and 5000-series aluminum, while providing a more forgiving arc and increased consumable life.
 |
 |
- The Millermatic® Passport® Plus all-in-one MIG welder provides a superior arc in an ultra portable and lightweight (45 lbs.) package. The Passport Plus has an impressive arc on mild and stainless steel. But when combined with the new direct-connect Spoolmate™ 100 Series spool gun, the Passport Plus provides outstanding welding performance on 18-gauge through 1/4" aluminum. A three-position material selection switch sets optimal arc characteristics for steel, stainless steel and aluminum.
 |
- Miller designed the Maxstar® 150 DC Stick/TIG welder for mechanical contractors, fabricators and maintenance/repair personnel who work in the field and demand a full-featured Stick/TIG welding power source. The Maxstar 150 weighs just 13.7 lbs., has a 5 to 150-amp welding range and features Miller’s Auto-Line™ technology for automatic linking to 115-230 VAC and Line Voltage Compensation (LVC™) to keep power output constant regardless of +-10% fluctuations in input power.
 |
- The Miller Maxstar® 200 DC TIG/Stick inverter-based power supply features Miller’s Auto- Line™ technology, allowing it to accept input power, from 115 to 460V, single- or three-phase, 50 or 60 Hz without any manual relinking, allowing the user to plug into any type of primary current and begin welding. This 37-lb. welder has a 1 to 200-amp output and produces code-quality TIG and Stick arcs traditionally found in larger industrial machines.
About Miller
Miller Electric Mfg. Co., headquartered in Appleton, Wis., is a leading worldwide manufacturer of Miller brand arc welding equipment and is a wholly owned subsidiary of Illinois Tool Works Inc. (NYSE: ITW).
For more information, visit Miller’s Web site at www.MillerWelds.com, call 1-800-4-A-Miller (800-426-4553), e-mail info@millerwelds.com, fax 877-327-8132, or write to Miller Electric Mfg. Co., P.O. Box 100, Lithonia, GA 30058.
Click to download Miller logos
Editorial Contact: John Dymale, Insight Marketing, johnd@imipr.com (262) 478-9293 |
